DIN 17102 EStE460 Steel Plate | EStE460 Fine Grain Steel

DIN 17102 EStE460, also written EStE 460, ESTE460, DIN17102 EStE460 and EStE460 steel plate, is a weldable normalized fine-grain structural steel under DIN 17102. The E prefix is the special low-temperature quality — colder and cleaner than TStE460. Yield in the thin band is still 460 MPa. Tensile at ≤70 mm is still typically 570–720 MPa. This is the DIN 17102 special-low-temp line that conversion tables map to P460NL2. It is not EStE420 and not EStE500. SHH STEEL is a global steel mill sourcing partner and steel manufacturer & exporter (mill-direct, China origin) for this grade. Plate is produced to DIN 17102 and shipped to buyers in the USA, Europe, Middle East and Southeast Asia.

A purchase order that only says “460 NL2 fine grain” is incomplete if the drawing still names DIN. Write DIN 17102 EStE460 and the impact temperature. Do not ship StE460, WStE460 or TStE460 against an EStE460 drawing. Do not ship EStE420 or EStE500 because the yield step is wrong.

DIN 17102 is a legacy specification. New European pressure work usually names P460NL2. Replacement projects still name EStE460 when an old German calculation or mill qualification stays on DIN.

This page is not DIN 17100 St52-3. It is not SA516 Gr.70. It is not nickel plate like SA203 Gr.A or SA203 Gr.D. It is not ASTM A36 steel plate. It is not QT alloy under ASME SA387 or ASME SA543.

Company scope: global steel mill sourcing partner – SHH STEEL.

This plate sits in structural steel plates, high strength low alloy plates and next to pressure vessel steel plates. ASME carbon comparisons belong on ASME SA516 and ASME SA662, not as automatic substitutes.

DIN 17102 EStE460 / EStE 460 is the cleanest 460 column in this book. Product analysis is slightly wider than heat analysis.

Heat Analysis and Product Analysis — DIN 17102 EStE460 (typical limits)

Compare the 460 family:

Do not ship a TStE460 heat as EStE460. If the order dual-names P460NL2, residuals must also fit EN 10028-3 of the named edition. SHH STEEL reports heat analysis on every certificate and product analysis when the order names it.

Room-temperature yield and tensile follow the 460 family. Special low-temperature impact is why the E letter exists.

Room-temperature properties — DIN 17102 EStE460 (typical published bands)

Do not quote 460 MPa yield on an 80 mm plate. Do not treat 570–720 MPa tensile as permission to stamp SA516 Gr.70, SA662 Gr.A or SA285 Gr.A.

Impact for EStE460 is the special low-temperature package. P460NL2 comparison is commonly −50 °C with the tighter NL2 chemistry idea. Write the test temperature, orientation and energy on the order. Do not assume a TStE460 coupon covers EStE460.

Same 460 MPa yield idea. E is not a marketing letter on TStE460. E has lower carbon, lower P and S, and a colder quality idea. SHH STEEL will not ship TStE460 against an EStE460 purchase order without a written change.

SA285 Gr.C, SA299 Gr.B and SA737 Gr.C are also vessel or HSLA plates. None of them is EStE460.

DIN 17102 EStE460 / EStE 460 is selected for welded structures and pressure equipment that need the coldest fine-grain package at the 460 MPa yield step: low-temperature tanks, cold-climate steelwork and other work still calculated to the old German book. It is the practical DIN counterpart to P460NL2. It is not automatically an ASME Section VIII plate. If the vessel is ASME, the drawing should name an ASME or ASTM grade such as SA516 Gr.70, SA662 Gr.C or SA537 Cl.1.

SHH STEEL supplies this plate to fabricators in the United States, Europe, the Middle East and Southeast Asia. It is not nickel low-temp plate like SA203 Gr.B or SA203 Gr.F. Those grades use nickel. EStE460 uses fine grain, low residuals and normalize. It is not QT Ni-Cr-Mo like SA543 Type B Cl.3. It is not Cr-Mo like SA387 Gr.22 Cl.2 or SA387 Gr.11 Cl.2. Stainless inquiries belong on ASME SA240 or ASTM A240.

EStE460 is killed fine-grain C-Mn-microalloy steel with the lowest C / P / S in the 460 family. Welding is production welding, and Code welding when the equipment is a vessel.

Qualify procedures to the applicable code. For ASME work that happens to use a dual-named plate, use ASME Section IX. Consumables should match the 570–720 MPa tensile band, not a SA387 Gr.12 Cl.2 Cr-Mo procedure and not a QT procedure from SA517 Gr.Q. Preheat follows thickness and hydrogen control. The fabricator owns the WPS. SHH STEEL can share mill heat data for that review.

Usual delivery from SHH STEEL is normalized DIN 17102 EStE460 / EStE 460 plate. Fine-grain practice and normalize are the product idea. As-rolled shipment is a special agreement and is a poor fit for a special low-temperature quality.

If the vessel or structure will see PWHT, test coupons shall follow a simulated cycle when the order names it. This is not the QT route used on SA738 Gr.B or SA737 Gr.B. Special heat treatment, extra simulation or third-party hold points add time. Plan about two months when those extras are on the order.

The certificate lists DIN 17102 EStE460 (and EStE 460 if requested); heat number; heat analysis including the tighter C / P / S; product analysis when ordered; tensile results to the correct thickness column; normalize statement; impact at the named temperature. Certificates may be EN 10204 3.1 or EN 10204 3.2. Dual marking to P460NL2 is available only when chemistry, tensile and impact all fit the named EN edition.

Usual supply range from SHH STEEL for EStE460 fine grain steel:

• Thickness: commonly 6 mm – 150 mm. Confirm any request above 150 mm against mill capability
• Width: 1500 mm – 4000 mm
• Length: 3000 mm – 12000 mm
• Cut-to-length plates and nest sizes inside those limits

Ship plate inquiries belong on shipbuilding steel plates or BV Rules. Weathering plate belongs on EN 10025-5 or Corten A/B. TMCP fine-grain structural belongs on EN 10025-4. QT structural belongs on EN 10025-6. Ordinary structural belongs on EN 10025-2 or JIS G3106.

Dimensional limits follow the mill rolling standard named on the order, commonly EN 10029 for plate when the buyer is in Europe. Do not apply ASTM A36/A36M structural tolerances to a DIN fine-grain plate without writing them. UT to EN 10160 or ASTM A435 / A577 / A578 is added when the order names it.

Most export DIN 17102 EStE460 / EStE 460 orders add extras. SHH STEEL does not assume them.

Charpy details. Temperature, energy, location and orientation. This is the reason EStE460 exists. Write the temperature explicitly.

Product analysis. Add this when the destination file wants finished-plate chemistry, not only ladle chemistry.

Simulated PWHT. When the equipment will be stress-relieved.

NDE. UT per the named method.

Z-direction / through-thickness testing. When the drawing names Z15 / Z25 / Z35.

Restricted residuals. Some European files copy EN 10028-3 NL2 options onto EStE460. Write those options on the order.

Third-party. EN 10204 3.2, with inspectors arranged for US, European or Middle East documentation packages.

These names are project-comparison grades. They are not automatic substitutes.

ASME SA515 is not EStE460.

Stainless inquiries belong on stainless steel products, JIS G4305 or AISI stainless. Other vessel comparisons: SA302 Gr.A, SA204 Gr.B, A516 Grade 70, SA533 Type C Cl.1, SA517 Gr.P, SA738 Gr.C.

SHH STEEL is a global steel mill sourcing partner with mill partnerships in China. We supply ASTM, ASME, EN, DIN and JIS steel to the USA, Europe, Middle East and Southeast Asia. Origin is mill-direct, China origin. We do not treat DIN 17102 EStE460 as an Asia-only stock item. Inquiry packages are written for fabricators and EPC buyers in Houston, Rotterdam, Antwerp, Jebel Ali, Dammam, Singapore and surrounding ports.

Typical trade terms:

• FOB Shanghai
• CIF Houston
• CIF Rotterdam
• CIF Jebel Ali
• Other CIF / CFR ports on request (Los Angeles, New York, Hamburg, Genoa, Jeddah, Mundra, Ho Chi Minh)

Typical lead time for DIN 17102 EStE460 / EStE 460:

• Ex-stock / ready plate: about 5–7 days after order confirmation, subject to actual warehouse size and cutting
• Mill rolling, standard normalize: about 45 days
• Special heat treatment, simulated PWHT, 3.2 hold or extra NDE: about 2 months

Documents travel with the cargo: mill certificate, packing list, commercial invoice, bill of lading, and EN 10204 3.1 or 3.2 as ordered. Third-party inspection can be arranged before loading for US, European or Middle East projects. Packing is seaworthy, with edge protection and marking in English as specified on the order.

If the buyer needs dual P460NL2 marking for a European file, say so on the inquiry. If the buyer needs a PED / 3.2 file, say so on the inquiry. Do not assume a domestic Chinese certificate format will pass at destination.

SHH STEEL is a global steel mill sourcing partner and steel manufacturer & exporter (mill-direct, China origin). We supply ASTM / ASME / EN / DIN / JIS steel to the USA, Europe, the Middle East and Southeast Asia. On DIN 17102 EStE460 / EStE 460 that means mill pricing, EStE460 chemistry with tight C / P / S reported as heat analysis and as product analysis when ordered, recorded normalize, tensile results to the correct thickness column, impact at the named special low temperature, 3.1 as standard and 3.2 when specified. Trade terms include FOB Shanghai and CIF Houston / Rotterdam / Jebel Ali.

We keep the prefix and the number on the order. EStE460 is not TStE460. EStE460 is not StE460. EStE460 is not WStE460. EStE460 is not EStE420. EStE460 is not EStE500. DIN 17102 is not DIN 17100. EStE460 is not SA516 Gr.70. EStE460 is not SA387 Gr.22 Cl.2. If the drawing names TStE460, we will not ship EStE460 and call the grades the same just because yield is 460 MPa.

Company scope: global steel mill sourcing partner – SHH STEEL.

DIN 17102 EStE460 Steel Plate, also searched as EStE 460, ESTE460 and DIN17102 EStE460, is weldable normalized fine-grain steel under DIN 17102 for special low-temperature service at the 460 MPa yield step, typically 570–720 MPa tensile at ≤70 mm, with the tightest C / P / S in the 460 family, and the usual DIN counterpart to P460NL2. Whether the inquiry says DIN 17102 EStE460, EStE 460 or EStE460 steel plate, SHH STEEL as a global steel mill sourcing partner and steel manufacturer & exporter (mill-direct, China origin) supplies plate with EStE460 chemistry, recorded normalize, named impact temperature, and EN 10204 3.1 or 3.2 certification.

SHH STEEL supplies DIN 17102 EStE460 / EStE460 Fine Grain Steel to the USA, Europe, the Middle East and Southeast Asia for work that actually names this grade. FOB Shanghai / CIF Houston / Rotterdam / Jebel Ali.

Contact SHH STEEL for mill rolling, stock inquiry, dual P460NL2 marking when eligible, impact testing, 3.2 inspection or a quotation.

DIN 17102 EStE460 Steel Plate, EStE 460, ESTE460, DIN17102 EStE460, P460NL2, special low temperature fine grain steel, EStE460 supplier, global steel mill sourcing partner SHH STEEL