ASTM A213 TP310HCbN Stainless Steel Tube | ASTM A213 Stainless Steel - SHH STEEL

ASTM A213 TP310HCbN Stainless Steel Tube

ASTM A213 TP310HCbN / UNS S31042 seamless boiler, superheater and heat-exchanger tube — H-grade 24–26% Cr / 19–22% Ni with C 0.04–0.10%, Nb 0.20–0.60%, N 0.15–0.35%, Table 4 floors of 95/43 ksi, hardness max 256 HBW / 100 HRB, 1900 °F solution anneal, and ASTM grain size No. 7 or coarser. SHH STEEL supplies cold-finished and hot-finished seamless tube with EN 10204 3.1 MTCs that report Nb, N, and grain size.
Grade
TP310HCbN / UNS S31042
Standard
ASTM A213 / A213M
Product form
Seamless boiler / superheater / heat-exchanger tube (cold-finished and hot-finished)
Size
Typical OD × min wall (or average wall) within ~1/8 in. [3.2 mm] ID to 5 in. [127 mm] OD and ~0.015–0.500 in. [0.4–12.7 mm] wall; other diameters by agreement
Share:
Overview
Chemical Composition
Mechanical Properties
Specification
Equivalent Grades
Heat Treatment
Corrosion Resistance
Applications
Weldability
Surface Finishes
Inspection and Testing
Packaging and Shipping
Why Choose SHH STEEL
Supply Capability
FAQ
Conclusion

What is ASTM A213 TP310HCbN Stainless Steel Tube

ASTM A213 / A213M covers seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. Grade TP310HCbN / UNS S31042 is the nitrogen-strengthened H-grade niobium member of the 310 family: melting carbon 0.04–0.10%, chromium 24.0–26.0%, nickel 19.0–22.0%, niobium 0.20–0.60% as a fixed band (not the 10×C formula used on TP310HCb), nitrogen 0.15–0.35%, and ASTM grain size No. 7 or coarser on the heat-treatment lot. That package exists for creep-oriented USC / high-temperature boiler and furnace tube that needs 25Cr–20Ni oxidation resistance, intentional carbon and coarse grain, Cb/Nb stabilization, and nitrogen-driven room-temperature strength above the classic 75/30 ksi 310 rows — not as a casual dual stamp of A213 TP310HCb plus nitrogen.

SHH STEEL can supply ASTM A213 TP310HCbN stainless steel tube as seamless cold-finished and hot-finished product in the usual boiler, furnace, and heat-exchanger OD × wall / BWG band, shipped with EN 10204 3.1 mill test certificates that report ladle chemistry including niobium and nitrogen, Table 4 tensile and hardness, and the E112 grain-size result. Dual A213 / SA-213 marking is available only when the purchase order asks for both independent standards. Browse 310-family grades on the A213/A213M hub.

Shop names such as 310HCbN, HR3C-type 310, S31042, or “H-grade Nb-N 25-20” do not replace the ASTM grade on the MTC. Sister grades under the same ASTM standard include A213 TP310HCb, A213 TP310H, A213 TP310Cb, A213 TP310S, and A213 TP310MoLN. A213 covers seamless tube only — cold-finished versus hot-finished is the process choice, not a WLD/HCW manufacturing-type letter.

Chemical Composition of A213 TP310HCbN

Two chemistry layers matter for TP310HCbN under ASTM A213. Melting analysis is mandatory for every heat; product analysis on finished tube applies only when Supplementary Requirement wording or the purchase order invokes it through ASTM A1016/A1016M, with tolerances typically from ASTM A480/A480M Table A1.1. Reviewers should check four lines together before anything else: the 0.04–0.10% carbon band, the Nb 0.20–0.60% range (fixed band, not 10×C), the N 0.15–0.35% band, and the 24–26 / 19–22 Cr–Ni windows. Missing any one of those means the heat is not TP310HCbN. Nitrogen analysis method is a matter of agreement between purchaser and producer (Footnote B) — put the agreed method on the PO when N reporting must follow a named technique.

The tables below reproduce the melt limits for TP310HCbN / UNS S31042, the product-analysis limits from A480 Table A1.1 practice, and a short snapshot against TP310HCb and TP310H. Values are maximum unless a range is shown; ellipsis (…) means no requirement.

Melting analysis (heat / ladle analysis)

Element TP310HCbN (UNS S31042) melting analysis
Carbon (C) 0.04 – 0.10
Manganese (Mn) ≤ 2.00
Phosphorus (P) ≤ 0.045
Sulfur (S) ≤ 0.030
Silicon (Si) ≤ 1.00
Chromium (Cr) 24.0 – 26.0
Nickel (Ni) 19.0 – 22.0
Molybdenum (Mo) … (no requirement)
Nitrogen (N) 0.15 – 0.35
Niobium (Nb / Cb) 0.20 – 0.60

Source: ASTM A213/A213M stainless chemistry table for Grade TP310HCbN / UNS S31042 (public mill / specification PDF excerpt — _ref_a213.txt / A213–13 table text). Confirm the ordered edition on the purchase order. Stainless table number is edition-dependent (Table 2 later / Table 1 older).

Product analysis — A480/A480M Table A1.1 tolerances applied

Element Melting Tolerance (A480 A1.1) Product analysis limit
Carbon (C) 0.04 – 0.10 0.01 under / over 0.03 – 0.11
Manganese (Mn) ≤ 2.00 0.04 over ≤ 2.04
Phosphorus (P) ≤ 0.045 0.010 over ≤ 0.055
Sulfur (S) ≤ 0.030 0.005 over ≤ 0.035
Silicon (Si) ≤ 1.00 0.05 over ≤ 1.05
Chromium (Cr) 24.0 – 26.0 0.25 under / over 23.75 – 26.25
Nickel (Ni) 19.0 – 22.0 0.15 under / 0.20 over 18.85 – 22.20
Nitrogen (N) 0.15 – 0.35 0.02 under / 0.04 over 0.13 – 0.39
Niobium (Nb) 0.20 – 0.60 0.05 under / over 0.15 – 0.65

HCb vs HCbN snapshot

Element TP310HCb (S31041) TP310HCbN (S31042) TP310H (S31009)
C 0.04 – 0.10 0.04 – 0.10 0.04 – 0.10
Nb (Cb) 10×C – 1.10 0.20 – 0.60 …
N … 0.15 – 0.35 …
Table 4 tensile / yield 75 / 30 ksi 95 / 43 ksi 75 / 30 ksi
Grain size No. 7 or coarser No. 7 or coarser No. 7 or coarser

Do not confuse the niobium rule: A213 TP310HCb uses the formula minimum 10×C up to 1.10%, while TP310HCbN uses a fixed 0.20–0.60% Nb band plus mandatory nitrogen. Molybdenum remains a no-requirement ellipsis on both — wet chloride framing still belongs with Mo grades such as A213 TP310MoLN or the 316 family.

When product analysis is ordered, finished tube may read C 0.03–0.11%, Mn ≤2.04%, P ≤0.055%, S ≤0.035%, Si ≤1.05%, Cr 23.75–26.25%, Ni 18.85–22.20%, N 0.13–0.39%, and Nb 0.15–0.65% under the A480 practice applied above. Nitrogen and niobium product tolerances for these bands are taken from sister-pack A480 practice — confirm the A480 edition if product analysis is contractual. Put any tighter project floors on the purchase order before heat selection.

Mechanical Properties of A213 TP310HCbN

ASTM A213 Table 4 sets a distinctly higher room-temperature tensile floor for TP310HCbN than for ordinary 310 H or HCb rows: 95 ksi [655 MPa] tensile strength and 43 ksi [295 MPa] yield strength (0.2% offset), with elongation of 30% minimum in 2 in. or 50 mm. Hardness maximum is 256 HBW or 100 HRB (the public Table 4 excerpt for S31042 prints Brinell and Rockwell without a Vickers companion on this row). The nitrogen band is the primary reason those floors sit above the 75/30 ksi pair used on A213 TP310H and A213 TP310HCb. Grain size No. 7 or coarser remains mandatory on the heat-treatment lot.

Property TP310HCbN requirement
Tensile strength, min (Table 4) 95 ksi [655 MPa]
Yield strength (0.2% offset), min (Table 4) 43 ksi [295 MPa]
Elongation in 2 in. or 50 mm, min (Table 4) 30%
Hardness, max (Table 4) 256 HBW or 100 HRB
Grain size ASTM No. 7 or coarser (per heat-treatment lot)

Source: ASTM A213/A213M Table 4 for TP310HCbN / UNS S31042 and H-grade grain-size language (public specification PDF excerpt — _ref_a213.txt). Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] ID or thinner than 0.015 in. [0.4 mm] wall. Flattening and flaring tests sit beside tension and hardness on a lot basis.

A complete TP310HCbN release package reports tensile, hardness, carbon band, niobium band, nitrogen band, and grain size together. A tensile-only MTC that omits N, Nb, or E112 grain size is not a complete HCbN acceptance package — ask for all of those results on the EN 10204 3.1 certificate before releasing the heat to fabrication.

Dimensions and Tolerances

Dimensional supply for ASTM A213 TP310HCbN is tube language — OD × wall (minimum or average) and BWG / gauge — covering boiler, furnace, and heat-exchanger sizes rather than leading with ASME B36.19 pipe schedules. Usual A213 sizes run from about 1/8 in. [3.2 mm] ID to 5 in. [127 mm] OD with min wall about 0.015–0.500 in. [0.4–12.7 mm]; other diameters by agreement. Creep-range and USC boiler datasheets almost always assume minimum wall — state wall basis on the purchase order.

OD and wall variations follow ASTM A1016/A1016M as invoked by A213. Cold-finished tubes commonly hold tighter OD; hot-finished tubes allow wider windows. Confirm exact rows for the OD and finish on the ordered edition.

Item Typical A213 TP310HCbN dimensional practice
Product form Seamless only (cold-finished or hot-finished)
Usual size band ~1/8 in. [3.2 mm] ID to 5 in. [127 mm] OD; wall ~0.015–0.500 in. [0.4–12.7 mm]
Wall basis Minimum wall (default for boiler / superheater / furnace) or average wall when specified
OD / wall tolerances Per ASTM A1016/A1016M for finish route and size
Length Cut lengths for boiler / furnace / HX bundles; mill random by agreement
Secondary note B36.19 schedules only as a buyer cross-reference

Put cut list, design metal temperature, S2 stabilizing needs, nitrogen analysis method, and end preparation on the enquiry. Minimum wall remains first-class for HCbN tube the same way it does for other A213 H grades.

Equivalent Grades

Equivalence language around 310HCbN often collapses HR3C-type shop names, plate forms, and ordinary HCb into one nickname. ASTM A213 Grade TP310HCbN / UNS S31042 is the governing designation for this article; near-chemistry plate or cast forms are not automatic A213 substitutes.

Designation Notes
ASTM A213 / A213M Grade TP310HCbN Governing ASTM seamless boiler / HX tube product standard for this article
UNS S31042 Unified number in the stainless chemistry table
ASME SA-213 TP310HCbN Separate ASME Code Book adoption — dual-mark only when the PO asks
Related HCb A213 TP310HCb — Nb formula 10×C–1.10, no N band, 75/30 ksi
Related H-grade A213 TP310H — H carbon/grain-size without Nb or N
Related Mo+N A213 TP310MoLN — L carbon + Mo + N on different Cr–Ni / tensile path
Related plate A240 / SA240 flat product in the 310 family — order plate and tube under their own standards

Dual A213/SA-213 marking is a purchase-order option. Compare TP310HCb and TP310H on their own pages before assuming a mixed nickname equals TP310HCbN on the MTC.

Heat Treatment and Delivery Condition

TP310HCbN under ASTM A213 is furnished solution treated at a minimum of 1900 °F [1040 °C], then quenched in water or cooled rapidly by other means. The heat-treatment table carries ASTM grain size No. 7 or coarser for the heat-treatment lot. Public PDF layout places Footnote F/H markers near the TP310HCb / TP310HCbN rows — confirm the ordered edition’s superscripts before freezing Footnote H language on the purchase order. Footnote H, where applicable, warns that a solution-treating temperature above 1950 °F [1065 °C] may impair resistance to intergranular corrosion after subsequent sensitizing exposure; when the purchaser specifies it, a lower-temperature stabilization or resolution anneal shall follow the higher-temperature solution anneal.

Cold-finished versus hot-finished is a process and dimensional route, not a substitute for the anneal, the grain-size check, or any ordered stabilizing hold. Delivery condition for SHH STEEL TP310HCbN is solution annealed and pickled (or bright annealed by agreement), with anneal temperature, quench method, niobium, nitrogen, and E112 grain-size result on the EN 10204 3.1 certificate.

Supplementary Requirement S2 (stabilizing heat treatment) explicitly lists TP310HCbN among the grades that shall be given a stabilizing treatment after the solution anneal when the purchaser specifies S2. Write S2 onto the purchase order when the datasheet requires that post-solution stabilizing hold — do not assume base A213 includes it automatically for every HCbN shipment. Full temperature/time wording is edition text — confirm on the ordered edition.

Corrosion Resistance

TP310HCbN is built for high-temperature oxidation resistance from 24–26% Cr / 19–22% Ni, plus niobium stabilization against intergranular corrosion, plus H-grade carbon/grain-size controls, plus nitrogen for strength. Molybdenum remains a no-requirement ellipsis — wet chloride pitting framing still belongs with A213 TP310MoLN, A213 TP316L, or higher-Mo grades.

Optional S2 and any ordered A262 Practice E exist because Nb-bearing H grades can lose IGC resistance if solution temperatures run too high without a subsequent stabilizing or resolution step. Put those Supplementary Requirements on the purchase order when the project requires demonstrated IGC performance rather than chemistry-and-grain-size assurance alone. Sulfidation and carburizing atmospheres still need process-specific review beyond a generic stainless catalogue claim.

Applications of A213 TP310HCbN Tube

Buyers specify ASTM A213 TP310HCbN when a single seamless tube grade must satisfy creep-range H-grade carbon and grain-size rules, fixed-band niobium stabilization, nitrogen-driven 95/43 ksi room-temperature floors, and 25Cr–20Ni oxidation resistance. Typical placements include USC / advanced boiler superheater and reheater coils, high-temperature furnace sections with heavy fabrication welding, and Code-driven lists that name S31042 or TP310HCbN explicitly rather than a shop “HR3C” nickname alone.

Do not assemble HCbN by dual-stamping unrelated heats of TP310HCb and a nitrogen grade. When Nb formula stabilization without nitrogen strength is enough, stay on A213 TP310HCb. When L-carbon Mo+N chloride-leaning 310 chemistry is the driver, open A213 TP310MoLN. SHH STEEL quotes OD × wall / BWG against the combined chemistry, grain-size, and optional S2 requirements on the datasheet.

Service theme Why TP310HCbN is considered
USC / creep-range boiler coils C 0.04–0.10 + grain size 7 + N 0.15–0.35 + 95/43 ksi
High-temperature HX with IGC concern Nb 0.20–0.60 + 24–26 / 19–22 oxidation resistance
S2-specified stabilizing after solution TP310HCbN listed under Supplementary Requirement S2
Not primary for wet chlorides No Mo requirement — use Mo grades instead

Weldability

TP310HCbN welds with austenitic practices using matching or near-matching Nb- and N-bearing 310H / 25-20 fillers when deposit chemistry must track the base-metal windows. The intentional carbon floor, fixed niobium band, and nitrogen strength package all belong in procedure qualification — treat the grade as HCbN base metal, not as generic 310S or as TP310HCb without nitrogen.

For tube-to-tubesheet and coil welding in creep-range service, confirm project limits on grain size, A262, nitrogen analysis method, and any mandatory S2 stabilizing treatment of the base metal before welding or after final heat treatment as the datasheet directs. Repair welding, when permitted, follows A1016/A1016M as invoked by A213.

Surface Finishes

Standard delivery for ASTM A213 TP310HCbN from SHH STEEL is solution annealed and pickled. Bright annealed finishes are available by agreement when process-side roughness requires them.

State finish together with OD × wall, end preparation, and whether S2 stabilizing is ordered. Grain-size, niobium, and nitrogen reporting on the MTC are independent of pickled versus bright surface.

Inspection and Testing

Lot testing for ASTM A213 TP310HCbN follows tension, hardness, flattening, and flaring under A213 / A1016, plus ASTM grain-size determination (E112) for the heat-treatment lot. Chemistry verification must include carbon band, niobium band, and nitrogen band compliance. NDE follows the ordered edition and purchaser supplements.

EN 10204 3.1 certificates from SHH STEEL report ladle chemistry with Nb and N, Table 4 tensile and hardness (95/43 ksi floors), heat-treatment condition, and grain-size result. When S2 or A262 Practice E is ordered, those results or statements appear as specified. Dual A213/SA-213 marking and third-party witness are available when written into the enquiry. A certificate missing Nb, N, or grain size is not a complete TP310HCbN release package.

Packaging and Shipping

TP310HCbN tubes ship in capped or plugged bundles with weather protection matched to the route. Cut lengths for boiler and furnace bundles are labeled by heat and size; export packing uses cases or steel-frame crates when required.

Marking includes ASTM A213, grade TP310HCbN / UNS S31042, size, heat number, and SHH STEEL identification. Dual SA-213 marking appears only when the purchase order requests it. Packing lists track the same heat numbers shown on the EN 10204 3.1 certificates, including grain-size lot identity where applicable.

Why Choose SHH STEEL

SHH STEEL treats ASTM A213 TP310HCbN as a combined H+Cb+N specification product: carbon band, fixed niobium range, nitrogen band, Cr–Ni windows, Table 4 95/43 ksi floors, and grain size No. 7 or coarser are checked together before a heat is offered. Quotations state OD × wall / BWG, wall basis, finish route, S2/A262 options, nitrogen analysis expectations, and whether dual A213/SA-213 marking is required.

We refuse nickname assemblies that stamp TP310HCb or TP310H as HCbN without the missing nitrogen and tensile controls. EN 10204 3.1 documentation includes Nb, N, and E112 grain size. Compare sisters on the A213/A213M hub before freezing the boiler or furnace tube list.

Supply Capability

SHH STEEL supplies ASTM A213 TP310HCbN seamless stainless steel tube in cold-finished and hot-finished routes across the usual boiler, furnace, and heat-exchanger OD × wall / BWG band. Capability below is an enquiry range — not a frozen warehouse SKU or tonnage claim.

Capability SHH STEEL practice for TP310HCbN
Product form Seamless cold-finished and hot-finished tube
Standards ASTM A213 / A213M; dual SA-213 when PO asks
Size band Typical within ~1/8 in. ID to 5 in. OD; other diameters by agreement
Wall basis Minimum wall or average wall as specified
Documentation EN 10204 3.1 MTC with Nb + N + grain-size result; S2 / A262 / third-party witness on request
Trade terms FOB / CFR / CIF / EXW and other agreed Incoterms

Stock / Available sizes

SHH STEEL quotes TP310HCbN against a stock-and-mill enquiry range rather than a frozen SKU/tonnage list. Representative OD × wall / BWG combinations for boiler, furnace, and heat-exchanger tube appear below.

Item Typical stock / enquiry range for TP310HCbN
Outside diameter 19.05, 25.4, 31.8, 38.1, 42.4, 50.8, 60.3, 76.2 mm (and other boiler/HX ODs on enquiry; through the usual A213 ~5 in. [127 mm] band)
Wall / BWG BWG 10–18 class walls and metric min-wall equivalents; heavier walls by agreement
Common OD × wall examples 25.4 × 2.11 mm; 31.8 × 2.77 mm; 38.1 × 2.77 mm; 42.4 × 3.56 mm; 50.8 × 3.05 mm; 60.3 × 3.91 mm — illustrative, confirm min vs average wall
Length Cut lengths for boiler / furnace / exchanger bundles; bends and random mill lengths on enquiry
Special Non-standard OD/wall, bright anneal, dual A213/SA-213, S2 stabilizing, A262 Practice E, agreed N analysis method, third-party witness — confirm before heat reservation

Send OD × wall (or BWG), wall basis, finish route, quantity or cut list, marking (A213 or dual A213/SA-213), and S2 / A262 / grain-size / N-method notes on one enquiry. We confirm C 0.04–0.10%, Nb 0.20–0.60%, N 0.15–0.35%, Cr 24–26% / Ni 19–22%, Table 4 95/43 ksi, and ASTM grain size No. 7 or coarser without inventing fake warehouse codes. Sisters A213 TP310HCb, A213 TP310H, and A213 TP310MoLN sit on the same hub.

FAQ

Is ASTM A213 the same as ASME SA-213 for TP310HCbN?
No. ASTM A213 / A213M is the ASTM International product specification for seamless boiler, superheater, and heat-exchanger tubes; ASME SA-213 / SA-213M is the separate ASME Code Book adoption. Dual-mark only when the purchase order asks for both names on the stencil and MTC. Chemistry, tensile floors, grain-size, and S2 rules align closely for a given referenced edition, but the standards remain independent documents.
Does ASTM A213 TP310HCbN include welded or HCW tube?
No. ASTM A213 covers seamless boiler, superheater, and heat-exchanger tubes only. There is no WLD or HCW manufacturing-type letter under A213. Cold-finished versus hot-finished describes the seamless process route and dimensional tolerances — not a welded product form. Order welded stainless pipe under a different product standard when that form is required.
What is the chemistry of ASTM A213 TP310HCbN?
Melting analysis for TP310HCbN / UNS S31042 is C 0.04–0.10%, Mn ≤2.00%, P ≤0.045%, S ≤0.030%, Si ≤1.00%, Cr 24.0–26.0%, Ni 19.0–22.0%, N 0.15–0.35%, Nb 0.20–0.60%, with Mo as a no-requirement ellipsis. Confirm the ordered A213 edition. Carbon band, fixed niobium range, and nitrogen band are all mandatory — none is optional on an HCbN heat.
TP310HCbN vs TP310HCb — what does the N add?
Both grades share C 0.04–0.10%, 24–26 / 19–22 Cr–Ni, and grain size No. 7 or coarser. TP310HCb uses Nb 10×C–1.10% with no nitrogen requirement and Table 4 75/30 ksi. TP310HCbN uses a fixed Nb 0.20–0.60% band plus N 0.15–0.35% and raises Table 4 to 95/43 ksi with 30% elongation and hardness max 256 HBW / 100 HRB. Order HCbN when nitrogen strength and the fixed Nb band are on the datasheet.
Why is niobium listed as 0.20–0.60% instead of 10×C on TP310HCbN?
The A213 stainless chemistry table for UNS S31042 prints a fixed niobium range of 0.20–0.60%, not the formula minimum used on TP310HCb / S31041. That is intentional grade language — do not rewrite HCbN certificates to a 10×C formula, and do not treat an HCb heat that happens to fall inside 0.20–0.60% Nb as automatic HCbN without the nitrogen band and 95/43 ksi floors.
Why does A213 require grain size No. 7 or coarser for TP310HCbN?
The coarse-grain requirement supports elevated-temperature / creep-oriented behavior expected from H-grade austenitic boiler tube, including the HCbN row. ASTM No. 7 or coarser is determined per heat-treatment lot under E112. A tensile-and-chemistry MTC that omits grain size is incomplete for TP310HCbN acceptance — ask for the E112 result on the EN 10204 3.1 certificate.
What is Supplementary Requirement S2 for TP310HCbN?
S2 requires a stabilizing heat treatment after the solution anneal for listed grades when the purchaser specifies S2. The public A213 excerpt lists TP310HCbN among those grades. Temperature of the stabilizing treatment is agreed between purchaser and vendor and is lower than the initial solution anneal. Write S2 onto the PO when required — base A213 does not apply it automatically to every HCbN shipment.
Does Table 4 set a hardness limit for TP310HCbN?
Yes. Table 4 lists hardness maximum 256 HBW or 100 HRB together with 95 ksi tensile, 43 ksi yield, and 30% elongation. Hardness, grain size, niobium, and nitrogen chemistry all belong on the release package — none replaces the others for HCbN boiler tube.
What heat treatment does A213 require for TP310HCbN?
Solution treatment at a minimum of 1900 °F [1040 °C], water quench or other rapid cool, and ASTM grain size No. 7 or coarser. When S2 is specified, a subsequent stabilizing heat treatment is required. Confirm Footnote F/H superscripts on the ordered edition near the HCb/HCbN rows. Delivery is solution annealed and pickled unless bright anneal is agreed.
Minimum wall vs average wall for A213 TP310HCbN — which should I specify?
Boiler, superheater, and furnace datasheets almost always expect minimum wall. Average wall is allowed when the purchase order says so, with A1016/A1016M tolerances for that basis. State wall basis on the enquiry rather than relying on pipe schedule numbers as the primary A213 wall story.
Is TP310HCbN a good choice for chloride-rich cooling water?
Not as a primary chloride strategy. Molybdenum is a no-requirement ellipsis on TP310HCbN, so wet chloride pitting resistance is not the grade’s design story. Use Mo-bearing grades such as TP310MoLN or TP316L for chloride-rich cooling; reserve TP310HCbN for high-temperature oxidation plus H-grade plus Nb-N strength duty.
Can I dual-certify TP310HCbN with TP310HCb on the same heat?
Only when one heat simultaneously clears both chemistry rows, both tensile/hardness tables, and the shared grain-size rule — and the purchase order asks for dual marking. Nb rules differ (fixed band versus 10×C formula), nitrogen is mandatory only on HCbN, and Table 4 floors differ (95/43 versus 75/30). Do not assume dual marking from a PMI gun or a shop nickname.

Conclusion

ASTM A213 TP310HCbN / UNS S31042 is the nitrogen-strengthened H-grade niobium 24–26% Cr / 19–22% Ni seamless stainless steel tube for boiler, furnace, and heat-exchanger service when creep-oriented carbon/grain-size controls, fixed-band Cb/Nb stabilization, and 95/43 ksi nitrogen-driven floors must travel together on the 25Cr–20Ni oxidation step. SHH STEEL supplies cold-finished and hot-finished seamless tube in the usual OD × wall / BWG band, solution annealed at 1900 °F [1040 °C], tested to Table 4 95/43 ksi and hardness limits, with niobium, nitrogen, and ASTM grain size No. 7 or coarser reported on EN 10204 3.1 certificates — S2 stabilizing and dual SA-213 marking only when the purchase order asks.

Contact: admin@steelspecs.com

Contact Us

Quality Steel Needed? Inquire for Offers

Need quality steel for your project? Inquire now to get tailored offers. Our team ensures quick responses, matching your needs with reliable steel solutions. Start your inquiry today.

    *

    *

    *

    *


    Related Products

    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response
    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response

      *

      *

      *

      *


      X