GB/T 714 Q345qE bridge steel plate stacked at SHH STEEL warehouse

GB/T 714 Q345qE Bridge Steel Plate Supplier

GB/T 714 Q345qE is bridge structural steel plate with 345 MPa minimum yield, 490 MPa minimum tensile and Charpy V-notch impact of 120 J at −40°C for 12–100 mm plate. SHH STEEL supplies Q345qE mill-direct, TMCP / TMCP+T, up to 150 mm, with Z15–Z35, UT and heat and product analysis.
Keywords
Q345qE, Q345qE steel plate, GB/T 714 Q345qE, Q345q-E, Q345q E, Q345qE bridge steel, Q345qEZ15, Q345qEZ25, Q345qEZ35, bridge steel plate, Q345qE supplier
Equivalent Grades
ASTM A709 Grade 50, 50W, HPS 50W / EN 10025-3 S355N, S355NL / EN 10025-4 S355M, S355ML (GB/T 714-2025 Annex B) — Material Specification: GB/T 714-2025 (supersedes GB/T 714-2015) — Delivery: TMCP / TMCP+T (N >100 mm by agreement)
Share:
General Description
Material Specification
Chemical Composition
Mechanical Properties
Q345q Quality Grades
GB/T 714-2025 vs 2015
Q345qE vs ASTM A709 / EN 10025
TMCP vs Normalized vs QT
Welding and Fatigue
Z15 / Z25 / Z35
Equivalent Material Grades
Testing and Inspection
Dimensions
Tolerances
Price and Ordering
Applications
Supply Capability
Why Choose SHH STEEL
FAQ
Conclusion

What is GB/T 714 Q345qE Bridge Steel Plate?

Q345qE is bridge structural steel plate to GB/T 714. Q stands for yield, 345 is the minimum yield in MPa for plate up to 50 mm, q stands for qiao (bridge) and E is the quality grade: Charpy V-notch at −40°C on longitudinal specimens.

Q345q is the workhorse of Chinese steel bridges: plate girders, box girders, orthotropic deck plate, cross beams and stiffeners on railway and highway spans. Most bridge drawings issued in China still start at Q345q. It has the widest thickness range in GB/T 714 (up to 150 mm) and the lowest carbon-equivalent cap of any TMCP grade.

Q345qE is what owners specify when the bridge is in a cold region or when they want a real toughness margin: −40°C Charpy with 120 J on plate from 12 to 100 mm. Northern railway bridges, sea-crossing girders and thick, highly restrained flanges are typical uses.

Which edition applies? GB/T 714-2025, in force since 1 May 2026, replaces GB/T 714-2015 in full. Drawings issued before 2026 often still cite 2015; we can certify to either, but the certificate will name one edition, not both.

SHH STEEL (Shanghai Shenghonghe Import & Export Co., Ltd.) is a steel manufacturer and exporter and global steel mill sourcing partner, mill-direct, China origin. We ship Q345qE cut to size with an EN 10204 3.1 or 3.2 certificate. Sister grades are listed under GB/T 714.

Material Specification

Specification element Requirement SHH STEEL compliance
Standard GB/T 714-2025 Q345qE Confirmed
Product Single-rolled plate ≤150 mm; hot-rolled strip and cut plate ≤25.4 mm Plate
Thickness with tensile values Up to 150 mm for Q345q Confirmed
Minimum yield ReL 345 MPa ≤50 mm; 335 MPa >50–100 mm Confirmed
Minimum tensile Rm 490 MPa ≤100 mm (no upper limit in the standard) Confirmed
Elongation A ≥ 20% Confirmed
Charpy V-notch −40°C, 120 J (12–100 mm), longitudinal Confirmed
Delivery condition TMCP or TMCP + tempering; normalized by agreement for >100–150 mm As ordered
Weldability index CEV (Table 6) and Pcm (Table 7) Printed on MTC
Ultrasonic testing Plate >20 mm: GB/T 2970, Class II or better Every plate
Through-thickness Z15, Z25 or Z35 to GB/T 5313, when ordered As ordered
Dimensions GB/T 709 Confirmed
Certificate GB/T 247; EN 10204 3.1 or 3.2 As ordered

Grades often compared with Q345qE are ASTM A709 Grade 50, ASTM A709 HPS 50W and EN 10025-4 S355M; the comparison below shows where they differ.

Chemical Composition: Heat Analysis and Product Analysis

Third-party labs test plate, not ladles. So when an inspector checks Q345qE, the result is a product analysis and must be compared with product limits, not with the heat limits on the certificate.

Table 1 below is the heat (ladle) analysis for Q345qE from GB/T 714-2025 Tables 1, 2 and 3.

Element Q345qE TMCP (%) Q345q normalized, >100–150 mm (%)
C, max 0.14 0.18
Si, max 0.55 0.55
Mn 0.80 – 1.60 0.90 – 1.60
P, max 0.020 0.020
S, max 0.010 0.010
Nb 0.010 – 0.090 0.005 – 0.060
V 0.010 – 0.080 0.010 – 0.080
Ti 0.006 – 0.030 0.006 – 0.030
Als 0.010 – 0.045 0.010 – 0.045
Cr, max 0.30 0.30
Ni, max 0.30 0.30
Cu, max 0.30 0.30
Mo, max — —
N, max 0.0080 0.0080
B, max 0.0005 residual (≤0.0014 if C ≤0.10%) 0.0005 residual
H, max 0.0002 0.0002

Nb, V, Ti and Al may be added singly or together. Added singly, each must meet the range above; added together, at least one must reach its minimum and Nb + V + Ti ≤ 0.22%.

Table 2 is the product analysis: the limits a check analysis on finished plate is judged against. GB/T 714-2025 clause 7.1.3 calls up GB/T 222 for the permitted deviations.

Element Heat limit (%) Deviation, GB/T 222-2025 Table 1 Q345qE product analysis (%)
C ≤ 0.14 +0.02 ≤ 0.16
Si ≤ 0.55 +0.05 ≤ 0.60
Mn 0.80 – 1.60 ±0.06 0.74 – 1.66
P ≤ 0.020 +0.005 ≤ 0.025
S ≤ 0.010 +0.005 ≤ 0.015
V 0.010 – 0.080 +0.02 / −0.01 ≤ 0.100
Ti 0.006 – 0.030 +0.02 / −0.01 ≤ 0.050
Nb 0.010 – 0.090 ±0.005 (listed for 0.015–0.060%) Above 0.060%: agree in contract
Cr ≤ 0.30 +0.05 ≤ 0.35
Ni ≤ 0.30 +0.05 ≤ 0.35
Cu ≤ 0.30 +0.05 ≤ 0.35
Als 0.010 – 0.045 ±0.003 Lower limit −0.003 (Table 1 row is for Al ≥0.015%; confirm)
Mo — Not listed in Table 1 —
N ≤ 0.0080 Listed only for 0.010–0.020% Agree in contract

How to read Table 2. Q345q TMCP heats are low-alloy steel, so Table 1 of GB/T 222 applies. Si ≤0.55% is above 0.37%, so +0.05% applies; Mn falls in the 0.80–1.70% band, so ±0.06%. For one heat, an element may deviate in one direction only.

Mechanical Properties

Tensile values follow Table 9 of GB/T 714-2025 for Q345q. Tensile specimens are transverse; round specimens are used above 40 mm. Where yield is not distinct, Rp0.2 replaces ReL.

Nominal thickness ReL min (MPa) Rm min (MPa) A min
≤ 50 mm 345 490 20%
> 50 – 100 mm 335 490 20%
> 100 – 130 mm 305 430 20%
> 130 – 150 mm 305 430 20%

Impact values follow Table 10, on longitudinal specimens, average of three:

Letter / test temperature KV2 ≤12 mm KV2 >12 – 100 mm KV2 >100 – 150 mm
E / −40°C 80 J 120 J 31 J

One single value may fall below the required average, but not below 70% of it. Plate over 8 mm and under 12 mm is tested with 7.5 mm specimens (75% of the value); 6–8 mm plate with 5 mm specimens (50%). Plate under 6 mm is not impact tested.

180° bend test, transverse: mandrel D = 2a up to 16 mm and 3a above 16 mm; may be omitted when the mill guarantees it. Yield ratio is not mandatory. If the contract asks for it, Annex C recommends ReL/Rm ≤ 0.88 up to 12 mm and ≤ 0.85 above 12 mm for TMCP plate.

Q345qC / Q345qD / Q345qE: Which Quality Grade?

Q345qE is tested at −40°C. It suits bridges in north-east China, Inner Mongolia, Xinjiang, Russia, Kazakhstan, Canada and high-altitude sites, and for thick, restrained members anywhere. E is tested at −40°C, with P ≤0.020% and S ≤0.010%. Many long-span bridges specify E even in mild climates, because thick plate and heavy welding raise the risk of brittle fracture.

Grade Test temp. KV2 ≤12 mm KV2 12–100 mm KV2 >100 mm P / S max (%)
Q345qC 0°C 80 J 120 J 55 J 0.030 / 0.025
Q345qD −20°C 80 J 120 J 47 J 0.025 / 0.015
Q345qE −40°C 80 J 120 J 31 J 0.020 / 0.010

Over-specifying the letter costs money; under-specifying it costs safety. Choose from the lowest service or erection temperature, then step up one letter for thick, restrained or fracture-critical members.

Q345qE: What Changed from GB/T 714-2015 to GB/T 714-2025

For Q345qE buyers the 2025 edition changes more than the year on the certificate. The points below come from the foreword of GB/T 714-2025 and its tables.

  • The Mn range for TMCP steel was revised: the minimum is now 0.80%, and the maximum may be raised to 2.00% by agreement.
  • CEV and Pcm limits were revised (Tables 6 and 7).
  • Normalized grades were dropped except for plate over 100 mm by agreement.
  • Tensile strength is now banded by thickness (e.g. lower minimum Rm above 100 mm) instead of one value.
  • Impact energy is set by thickness band (≤12 mm, 12–100 mm, >100 mm) in Table 10.
  • Yield ratio is no longer a clause value; it is agreed in the contract, with recommendations in informative Annex C.
  • Section products were removed; the standard now covers plate and strip only.
  • Delivery is TMCP, TMCP + tempering or QT; normalizing is kept only for Q345q/Q370q plate over 100 mm by agreement.

If a drawing cites 2015 and the plate is made to 2025, get the designer’s written acceptance; tensile strength above 100 mm and the yield-ratio basis differ.

Q345qE vs ASTM A709 and EN 10025: Which Grade Matches?

Can Q345qE replace a US or European bridge grade, or the other way round? Strength can match; toughness rules differ in kind, not only in number.

Property Q345qE ASTM A709 Grade 50 ASTM A709 HPS 50W EN 10025-4 S355M
Min. yield (MPa) 345 (≤50 mm) 345 345 355 (≤16 mm)
Tensile (MPa) 490 min 450 min 485 min 470 – 630
Charpy 120 J at −40°C (12–100 mm) CVN by temperature zone and member type (T / F) CVN by temperature zone; fracture-critical (F) levels 40 J at −20°C
Weathering chemistry No No Yes No

ASTM A709 sets Charpy requirements by temperature zone (1, 2, 3) and by member type: non-fracture-critical (T) or fracture-critical (F). GB/T 714 sets one value per letter, so compare the A709 zone with the GB/T 714 test temperature, not grade with grade.

EN 10025-3/-4/-6 grades show yield at the thinnest band; their values fall with thickness. GB/T 714 keeps 345 MPa to 50 mm. EN tensile ranges have upper limits; GB/T 714 gives minimums only.

The 120 J requirement in GB/T 714 for 12–100 mm plate is several times the 27–40 J typical of general structural grades. That margin is the main reason bridge owners specify Q345qE rather than GB/T 1591 plate.

Q345qE Delivery Condition: TMCP vs Normalized vs Quenched and Tempered

GB/T 714-2025 clause 3.2 defines TMCP as rolling with the final deformation in a controlled temperature range, including accelerated cooling with or without tempering (self-tempering included) but excluding direct quenching and quench-and-temper. The delivery route must be stated on the certificate.

Route Available for Q345qE Weldability index Notes
TMCP Yes, standard CEV (C >0.12%) or Pcm (C ≤0.12%) C ≤0.14%; most plate up to 100 mm
TMCP + tempering Yes Same as TMCP Used to relieve stresses or tune yield ratio
Normalized Only >100–150 mm, by agreement CEV by agreement C ≤0.18%; heavy plate only
Quenched and tempered Not listed — Not a GB/T 714 route at this level

For Q345q we supply TMCP as standard. Normalized plate makes sense only for heavy sections over 100 mm, where accelerated cooling gives less benefit; CEV is then agreed in the contract. For E-letter plate over about 50 mm, many mills add tempering after TMCP to reduce toughness scatter through the thickness.

Ask for the route on the purchase order. It changes the weldability index, the welding procedure and, for heavy plate, the price of Q345qE.

Welding Q345qE and Fatigue in Bridge Girders

GB/T 714-2025 clause 7.1.2 uses CEV for normalized, QT and TMCP steel with C >0.12%, and Pcm for weathering steel and TMCP steel with C ≤0.12%, both from the heat analysis:

CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15

Pcm = C + Si/30 + Mn/20 + Cu/20 + Ni/60 + Cr/20 + Mo/15 + V/10 + 5B

Index ≤50 mm >50–100 mm >100–130 mm
CEV, TMCP, C >0.12% (Table 6) ≤ 0.38 ≤ 0.40 by agreement
Pcm, TMCP (Table 7) ≤ 0.20 ≤ 0.20 ≤ 0.20
CEV, normalized — — By agreement

Most bridge fabricators qualify Q345qE procedures on plate from the same mill and route as the production order. Changing mill or route mid-project usually means re-qualifying. At −40°C, HAZ toughness often becomes the limit. Fabricators usually cap heat input and qualify the procedure at −40°C on plate from the same route.

Typical consumables for Q345qE: E50-class low-hydrogen electrodes (AWS E7018 type) and matching SAW wire/flux.

Fatigue. Welded details govern fatigue life in a bridge, and their fatigue strength is set by detail category, not by yield strength. Higher-strength plate can carry higher stress ranges only if detailing improves too.

Fatigue design follows JTG D64 (highway) and TB 10091 (railway) in China, EN 1993-1-9 in Europe and AASHTO LRFD in the US; fabrication commonly follows TB 10212, JTG/T 3650 or AWS D1.5.

Q345qEZ15, Z25 and Z35: Through-Thickness Plate for Bridges

Through-thickness properties matter wherever a full-penetration weld sits on the face of a plate, such as diaphragm-to-flange joints and cable anchor plates.

GB/T 714 adds the Z level to the end of the designation, for example Q345qEZ25. The test and acceptance follow GB/T 5313 and apply to plate 15 mm and thicker.

Z grade Heat sulfur, max (%) Reduction of area, avg / single (%)
Z15 0.010 15 / 10
Z25 0.007 25 / 15
Z35 0.005 35 / 25

E chemistry already limits S to 0.010%, the Z15 sulfur cap. Z25 (S ≤0.007%) and Z35 (S ≤0.005%) still need a cleaner heat.

For Q345qE, we test Z per GB/T 5313 batch rules and print the three reduction-of-area values on the certificate. Z options apply across the GB/T 714 bridge steel range.

Equivalent Material Grades

Annex B of GB/T 714-2025 lists foreign grades against each strength level. It is informative: it tells you which families are close, not that the plates are interchangeable.

Standard Grade(s) Fit for Q345qE
ASTM A709 ASTM A709 Grade 50, ASTM A709 Grade 50W, ASTM A709 HPS 50W Listed in Annex B
EN 10025-3 EN 10025-3 S355N, EN 10025-3 S355NL Listed in Annex B
EN 10025-4 EN 10025-4 S355M, EN 10025-4 S355ML Listed in Annex B
GB/T 1591 GB/T 1591 Q355ME General structural, lower impact
JIS G3106 JIS G3106 SM490C Closest by strength
GB/T 714 (weathering twin) Q345qNHE Same strength, weathering chemistry

Before substituting, compare three things line by line: minimum yield at the actual thickness, the impact test temperature and energy, and the weldability index. For Q345qE, the 120 J impact level and the Pcm/CEV caps are usually the hardest to match.

Q345qE Testing, UT and Certificate

A batch of Q345qE is one grade, one heat, one thickness, one rolling schedule and one heat-treatment condition, up to 60 t. Table 12 of GB/T 714-2025 sets the tests:

Test Frequency Method
Heat analysis 1 per heat GB/T 20066; GB/T 4336 / GB/T 223
Tensile 1 per batch GB/T 2975 / GB/T 228.1
Bend 180° 1 per batch (may be waived if guaranteed) GB/T 232
Charpy V at −40°C 3 specimens per batch GB/T 229
Through-thickness (Z) 3 specimens per batch, when ordered GB/T 5313
Ultrasonic Every plate >20 mm, Class II or better GB/T 2970
Surface and dimensions Every plate Visual and gauges

Impact retest: if a set fails, three more specimens are taken from the same batch. The average of all six must meet the requirement; two values may be below it, but only one below 70%. At −40°C, retest risk rises on heavy plate; we build a margin for retests into the delivery schedule.

Dimensions

Typical Q345qE dimensions on our offers:

  • Thickness: 6 mm – 150 mm under GB/T 714 tensile tables; most orders 8 – 60 mm
  • Width: 1500 – 4000 mm, depending on mill and thickness
  • Length: 6000 – 18000 mm; longer by enquiry
  • Edge: mill edge or cut edge
  • Weight: theoretical, 7.85 g/cm³

Deck plate, webs, flanges, diaphragms and stiffeners are cut to drawing. For U-ribs and rolled sections on the same bridge, see steel beam profiles and steel structural profiles.

Tolerances

GB/T 709 governs Q345qE thickness, width, length and flatness. Under Class B, plate may be up to 0.30 mm thin; the plus side grows with thickness and width.

Nominal thickness (mm) Width ≤ 1500 mm Width > 1500 – 2500 mm
> 8 – 15 −0.30 / +0.80 −0.30 / +1.00
> 15 – 25 −0.30 / +1.00 −0.30 / +1.20
> 25 – 40 −0.30 / +1.10 −0.30 / +1.30
> 40 – 60 −0.30 / +1.30 −0.30 / +1.50
> 60 – 100 −0.30 / +1.50 −0.30 / +1.80
> 100 – 150 −0.30 / +2.10 −0.30 / +2.50

Bridge fabricators often ask for Class C (zero minus) on deck and flange plate so section properties are never under the design value. Wider plates follow the heavier GB/T 709 rows; we state them on the offer.

Q345qE Price Factors and How to Order

There is no single Q345qE price. Mills price bridge plate as base plus extras, and the order sets the extras.

Cost driver Effect on price
Strength level Q345q Higher levels need more alloy and tighter rolling control
Quality letter Higher extra: −40°C testing, S ≤0.010%, more retest risk
Delivery route TMCP / TMCP+T (N >100 mm by agreement)
Thickness Over 60 mm and under 10 mm carry size extras
Z15 / Z25 / Z35 Low-sulfur heat, Z test, UT; Z35 costs most
Width and length Over 3000 mm wide or 15 m long needs mill confirmation
Quantity per size Mill minimums per heat and size
Inspection and processing 3.2 witness, profile cutting, blasting, priming quoted per item

To get a firm quote in one round, send:

  • Grade, edition and Z level, e.g. Q345qEZ25 to GB/T 714-2025
  • Thickness × width × length and pieces or tonnes
  • Delivery route and UT class if beyond Class II
  • Certificate type and inspector
  • Destination port and Incoterm

We quote plate price, extras and freight line by line. Need another letter? See Q345qC, Q345qD.

Applications

Sector Typical Q345qE components
Highway bridges Steel box girders, I-girders, orthotropic deck plate, U-ribs, diaphragms
Railway bridges Plate girders, truss chords and diagonals, gusset plates, bearing stiffeners
Urban viaducts Curved box girders, pier caps, steel-concrete composite girders
Pedestrian bridges Box sections, cable anchor plates
Long-span bridges Secondary members, cross frames, deck plate on cable-stayed spans

The letter E suits bridges in north-east China, Inner Mongolia, Xinjiang, Russia, Kazakhstan, Canada and high-altitude sites, and for thick, restrained members anywhere.

It is the wrong plate for pressure equipment (pressure vessel steel plates), unpainted exposure (weathering steel plates) or ship hulls (shipbuilding steel plates).

Supply Capability and Global Delivery

SHH STEEL sources Q345qE from first-line bridge-plate mills, including drafters of GB/T 714-2025 such as Ansteel, Valin Xiangtan, Jiangyin Xingcheng, Wuyang, Shougang and Xinyu.

  • Certificates: EN 10204 3.1 standard; 3.2 with third-party witness (SGS, BV, TÜV or owner’s inspector)
  • Tests: tensile, −40°C Charpy, bend, Z test, UT, product analysis
  • Processing: CNC plasma and flame cutting, bevelling, drilling, shot blasting and priming
  • Terms: FOB Shanghai, CFR, CIF; TT, LC or TT + LC
  • Marking: steel-stamped and paint-marked with grade, heat, size and mill, per GB/T 247

Buyers of Q345qE are usually bridge fabricators and EPC contractors working to Chinese drawings overseas. We ship worldwide.

Lead time: about 45–60 days from mill rolling; Z35, F letter or 3.2 inspection adds about 1–2 weeks. Sea time from Shanghai is about 7–12 days to Southeast Asia and 28–35 days to North Europe.

Why Choose SHH STEEL

As a steel manufacturer and exporter and global steel mill sourcing partner, SHH STEEL buys Q345qE straight from GB/T 714 mills, China origin. No mixed heats, no relabelled plate.

Before shipment we check four lines on every Q345qE certificate: yield and tensile for the actual thickness band, Charpy at −40°C, the CEV or Pcm for the delivery route, and UT results. If one fails, the plate does not ship as Q345qE.

Q345qE is also a sensible choice for fracture-critical members in milder climates. The tighter E melt (S ≤0.010%) already meets the Z15 sulfur cap.

We also tell buyers when another grade fits better. Neighbouring levels are Q370qE. The weathering counterpart is Q345qNHE. Browse more structural steel plates and high strength low alloy plates.

FAQ

What is Q345qE steel?
Q345qE is bridge structural steel plate to GB/T 714-2025. It has 345 MPa minimum yield up to 50 mm, 490 MPa minimum tensile, 20% elongation and Charpy V-notch impact of 120 J at −40°C for 12–100 mm plate. It is delivered TMCP or TMCP + tempering, with normalizing allowed above 100 mm by agreement.
What is the difference between Q345qE and Q345qD?
Strength and chemistry box are the same. Q345qE is Charpy tested at −40°C, Q345qD at −20°C, both needing 120 J for 12–100 mm plate. P/S caps are 0.020/0.010% for E and 0.025/0.015% for D. Choose by the lowest service or erection temperature.
Is Q345qE the same as Q345E?
No. Q345E is general structural steel (now Q355 under GB/T 1591-2018), while Q345qE is bridge steel to GB/T 714 with lower P and S, controlled weldability index, mandatory UT above 20 mm and 120 J impact for 12–100 mm plate. Bridge plate can replace general plate, not the reverse.
What is the ASTM or EN equivalent of Q345qE?
Close grades for Q345qE: ASTM A709 Grade 50, 50W, HPS 50W / EN 10025-3 S355N, S355NL / EN 10025-4 S355M, S355ML. These are close families, not drop-in substitutes; compare yield at thickness, impact temperature and energy, and the weldability index before substituting.
What does the q mean in GB/T 714 bridge steel grades?
The lowercase q stands for qiao, Chinese for bridge. In a grade such as Q420qD, Q means yield, 420 is the minimum yield in MPa, q marks bridge steel to GB/T 714 and D is the quality letter (−20°C Charpy). NH after the letter, as in Q420qDNH, marks weathering steel.
What is the carbon equivalent of Q345qE?
It depends on the route. For Q345qE up to 50 mm, GB/T 714-2025 sets CEV ≤0.38% (C >0.12%) or Pcm ≤0.20%. CEV applies to normalized, QT and TMCP steel with C >0.12%; Pcm to TMCP steel with C ≤0.12%.

Conclusion

Q345qE to GB/T 714-2025 is bridge plate with 345 MPa minimum yield, 490 MPa minimum tensile and 120 J Charpy at −40°C for 12–100 mm plate.

The next strength level is Q370qE, with Q345qC and Q345qD as sister letters. Before ordering Q345qE, confirm the edition on the drawing, the delivery route and any Z level; those three choices drive cost, lead time and welding.

With SHH STEEL the Q345qE certificate is complete: heat chemistry, weldability index, yield, tensile, elongation and Charpy, to EN 10204 3.1 or 3.2. Add product analysis, a Z level or a stricter UT class as needed.

We ship from Shanghai to bridge builders worldwide. Browse the full GB/T 714 range or other high strength low alloy plates.

Tell us the sizes, tonnage and any Z, UT or inspection needs. We check the request against GB/T 714 first, then confirm mill, route, lead time and price. Contact SHH STEEL today for Q345qE bridge steel plate.

Contact Us

Quality Steel Needed? Inquire for Offers

Need quality steel for your project? Inquire now to get tailored offers. Our team ensures quick responses, matching your needs with reliable steel solutions. Start your inquiry today.

    *

    *

    *

    *


    Related Products

    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response
    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response

      *

      *

      *

      *


      X