ASTM A269 TP304L Stainless Steel Tube | ASTM A269 Stainless Steel - SHH STEEL

ASTM A269 TP304L Stainless Steel Tube

ASTM A269 TP304L / UNS S30403 nominal-wall seamless and welded austenitic tubing with C ≤0.035%, Cr 18.0–20.0% and Ni 8.0–12.0%, solution annealed at ≥1900 °F [1040 °C] with hardness max 192 HBW / 200 HV or 90 HRB. SHH STEEL can produce and supply A269 TP304L tube with EN 10204 3.1 MTCs.
Grade
TP304L / UNS S30403
Standard
ASTM A269 / A269M
Product form
Seamless and welded tube (no filler metal for welded), heat-treated
Size
Typical OD × nominal wall from ~6 mm to 168 mm OD × 0.5–8.0 mm wall; other OD × wall by agreement
Share:
Overview
Chemical Composition
Mechanical Properties
Seamless and Welded
Specification
Equivalent Grades
Heat Treatment
Corrosion Resistance
Applications
Weldability
Surface Finishes
Inspection and Testing
Packaging and Shipping
Why Choose SHH STEEL
Supply Capability
FAQ
Conclusion

What is ASTM A269 TP304L Stainless Steel Tube

ASTM A269 / A269M covers nominal-wall seamless and welded austenitic stainless steel tubing for general corrosion-resisting and low- or high-temperature service. Grade TP304L is the low-carbon 18-8 member of that Table 1 family, listed as UNS S30403, with carbon ≤0.035% (see the small-OD / light-wall footnote discussed under chemistry), chromium 18.0–20.0%, and nickel 8.0–12.0%. Buyers specify TP304L on A269 orders when tubing will be welded into skids, panels, or hygienic lines and left as-welded in service that would sensitize standard TP304. The shop name “304L tube” still needs ASTM A269 on the purchase order so nominal-wall rules, hardness, flaring or flange tests, and marking apply — not an A213 boiler-tube or A312 pipe text.

SHH STEEL can produce and supply ASTM A269 TP304L stainless steel tube as seamless and welded product in the instrument-to-process OD × nominal-wall band, solution annealed, with EN 10204 3.1 mill test certificates reporting Table 1 ladle chemistry and Table 2 hardness. Typical sizes run about 6–168 mm OD × 0.5–8.0 mm nominal wall; other sizes by agreement. Compare sisters on the A269/A269M hub.

Sister A269 grades include A269 TP304, A269 TP304LN, and molybdenum-bearing A269 TP316L. For boiler/HX or pipe product forms of the same UNS idea, open or A312 TP304L. Keep the enquiry on a nominal-wall basis — A269 is not a minimum-wall boiler-tube standard.

If the duty is actually boiler / heat-exchanger minimum-wall tube or pipe rather than A269 nominal-wall tubing, open A213 TP304L, SA213 TP304L, A312 TP304L and SA312 TP304L and match the product standard to the drawing.

Chemical Composition of A269 TP304L

Table 1 melting analysis is mandatory for every TP304L heat under A269. Product analysis applies when ordered through A1016/A1016M and A480 Table A1.1 tolerances. SHH STEEL reports measured ladle (and product, when ordered) values without advertising unpublished tighter catalogue windows.

Public A269 Table 1 excerpts for TP304L / UNS S30403 are reproduced below (ASTM abstract cross-checked with the tubingchina A269 PDF). Values are maxima unless a range is shown. Footnote B in the Table 1 text notes that for small outside diameter or light walls — where many drawing passes are required — a carbon maximum of 0.040% may be necessary in TP304L, TP304LN, TP316L, and TP316LN; small OD is defined as less than 0.500 in. [12.7 mm] and light walls as less than 0.049 in. [1.2 mm] minimum wall in that footnote. Confirm the purchased edition.

Melting analysis (heat / ladle analysis) — Table 1

Element TP304L (UNS S30403) melting analysis
Carbon (C) ≤ 0.035 B
Manganese (Mn) ≤ 2.00
Phosphorus (P) ≤ 0.045
Sulfur (S) ≤ 0.030
Silicon (Si) ≤ 1.00
Chromium (Cr) 18.0 – 20.0
Nickel (Ni) 8.0 – 12.0
Molybdenum (Mo) … (no requirement)
Nitrogen (N) … (no requirement)

Source: ASTM A269/A269M Table 1 for TP304L / UNS S30403 (public excerpts). Nickel’s upper limit at 12.0% is wider than TP304’s 11.0% ceiling — a deliberate L-grade difference that shows up on MTCs. Carbon ≤0.035% (with the small-OD footnote) is why fabricators pick L for as-welded corrosive or hygienic service. No molybdenum — chloride-heavy duty still belongs on TP316L or higher under A269.

Mechanical Properties of A269 TP304L

A269 does not set a tensile/yield/elongation acceptance table for TP304L. Lot acceptance uses Table 2 hardness, flaring (seamless), flange and reverse flattening (welded), and hydro or NDE on each length. Do not import A213 tensile floors onto an A269 TP304L certificate unless the purchase order adds them.

Property TP304L requirement (A269 Table 2)
Hardness, max 192 HBW / 200 HV or 90 HRB
Tensile / yield / elongation Not specified as an A269 acceptance table for this grade

Source: ASTM A269/A269M Table 2 for TP304L / UNS S30403 (public PDF excerpt). Hardness ceiling matches TP304; the metallurgical difference is carbon, not hardness. Thin-wall superficial Rockwell alternatives follow the hardness clause of the ordered edition.

Seamless and Welded Tube

TP304L under A269 may be seamless or welded, hot- or cold-finished. Welded A269 tube is autogenous — no filler metal in the longitudinal seam — then cold-worked and solution-treated with the tube. That is not A312 WLD/HCW pipe stencil language; A269 records seamless or welded as the process route.

Seamless TP304L is flare-tested; welded TP304L takes flange and reverse-flattening tests. Both share Table 2 hardness and hydro or NDE per length. Low carbon makes L the usual choice when welded manifolds will stay as-welded — remember the mill anneal covers the as-shipped tube, not later shop welds. SHH STEEL can produce and supply both seamless and welded A269 TP304L.

Dimensions and Tolerances

Order by OD and nominal wall. A269 Table 4 (via A1016/A1016M) sets OD, wall, and cut-length tolerances; clause 12.2 covers thin-wall ovality.

OD group (A269 Table 4) Outside diameter tolerance Wall thickness tolerance
Up to ½ in. [13 mm] ±0.005 in. [0.13 mm] ±15%
½ to 1½ in. [13–38 mm], excl. ±0.005 in. [0.13 mm] ±10%
1½ to 3½ in. [38–89 mm], excl. ±0.010 in. [0.25 mm] ±10%
3½ to 5½ in. [89–140 mm], excl. ±0.015 in. [0.38 mm] ±10%
5½ to 8 in. [140–203 mm], excl. ±0.030 in. [0.76 mm] ±10%

Source: ASTM A269/A269M Table 4 (public PDF excerpt). Footnotes allow wider wall variation on heavy wall / low ID/OD and on sub-½ in. ID non-mandrel tube. If a drawing uses A213 minimum-wall language, say so on the enquiry so SHH STEEL does not build the wrong wall basis.

Equivalent Grades

TP304L / UNS S30403 is the ASTM tubing grade for low-carbon 18-8. Cousins include A213 TP304L, A312 TP304L, A240 Type 304L, and EN 1.4307 / X2CrNi18-9 — confirm chemistry and product form before substituting.

Reference Designation Note
ASTM A269 TP304L / UNS S30403 This product standard
UNS S30403 Chemistry identity
ASTM A213 TP304L Seamless boiler / HX tube
ASTM A312 TP304L Pipe
EN (approx.) 1.4307 / X2CrNi18-9 Commercial cousin

Inside A269, step to A269 TP304LN when nitrogen strengthening is specified, or to A269 TP316L when molybdenum is required.

Same-grade pages under related product standards (different wall basis and mechanical tables — not drop-in substitutes for A269 tubing): A213 TP304L, SA213 TP304L, A312 TP304L and SA312 TP304L. Confirm the product form before treating any of those pages as acceptance text for an A269 order.

Heat Treatment and Delivery Condition

All A269 TP304L ships solution heat-treated. Table 2 minimum austenitizing temperature is 1900 °F [1040 °C] with water quench or rapid cool. Ordered anneals below 1900 °F must be stenciled with the actual temperature after “HT.”

Item TP304L (A269 Table 2)
Austenitizing temperature, min 1900 °F [1040 °C]
Cooling Water quench or rapid cool
Hardness after heat treatment, max 192 HBW / 200 HV or 90 HRB
Delivery condition Solution heat-treated; pickled or bright-annealed by agreement

Source: ASTM A269/A269M §6 and Table 2 for TP304L. SHH STEEL’s MTC states the heat-treatment condition applied to the shipped lengths.

Corrosion Resistance

TP304L keeps the 18-8 passive film of TP304 with the decisive advantage that carbon ≤0.035% sharply cuts chromium-carbide precipitation risk in heat-affected zones. That is why L is the default A269 304-family grade for welded hygienic and process tubing left as-welded. It still lacks molybdenum, so chloride pitting performance stays below TP316L and 6Mo grades.

A269 publishes no PREN table for S30403 — do not invent one. Match the medium: food, pharma utility, and mild aqueous lines suit TP304L; chloride-bearing or seawater-adjacent duty usually needs A269 TP316L or higher.

Applications of A269 TP304L Tube

A269 TP304L dominates welded instrument panels, hygienic utility tubing, dairy and beverage lines, pharmaceutical water systems where 304L is allowed, and process skids that will not be solution-annealed after fabrication. Bright-annealed cold-finished L is the usual panel-shop choice; pickled welded L covers larger utility runs.

Use A213 for boiler/HX tube and A312 for pipe. For chlorides or reducing acids, step up the A269 alloy ladder. SHH STEEL can produce and supply A269 TP304L in the general-service band above and will redirect when the medium outgrows S30403.

When a sister enquiry is for boiler tube or pipe of the same grade, use A213 TP304L, SA213 TP304L, A312 TP304L and SA312 TP304L instead of stretching an A269 tubing page into the wrong product form.

Weldability

Low carbon is the reason to buy TP304L. GTAW/GMAW with 308L-type filler (when filler is used) is routine; mill autogenous welds on A269 welded tube are already solution-treated with the tube. Shop welds on cut lengths need proper purge and procedure — they sit outside the mill anneal.

If molybdenum is also required, order A269 TP316L rather than compensating with procedure alone. SHH STEEL supplies the mill product and MTC; welding procedure qualification remains the fabricator’s scope unless separately purchased.

Surface Finishes

Pickled and bright-annealed finishes cover most A269 TP304L orders. Bright anneal is preferred for instrumentation and hygienic ID/OD; pickle is the general-process default. Named OD polish grit is supplementary when the purchase order requires it.

Write Ra or scrubbed-ID notes into the enquiry. SHH STEEL can produce and supply those finishes when the mill can measure and report them.

Inspection and Testing

Lots are hardness-tested to Table 2, flare-tested when seamless, and flange- plus reverse-flattening-tested when welded. Each length takes hydro or NDE; the mill chooses unless the order locks the method. NDE lengths are marked and certified accordingly.

EN 10204 3.1 certificates from SHH STEEL report ladle chemistry, heat treatment, hardness, and hydro/NDE. PMI and third-party holds are available when named on the order.

Packaging and Shipping

End caps, bundled sleeves or crates, and waterproof wrap protect TP304L in transit. Bright-annealed and polished OD get extra sleeve protection. Coiled product follows A269’s continuous-coil rule.

Stencil carries ASTM A269, TP304L / S30403, size, heat, seamless or welded identity, and NDE when applicable. SHH STEEL matches marking to the purchase-order clause.

Why Choose SHH STEEL

SHH STEEL can produce and supply ASTM A269 TP304L as solution-treated seamless or welded tubing with Table 1 chemistry, Table 2 hardness, and EN 10204 3.1 documentation — not as relabelled TP304. We keep L distinct on the MTC, we state nominal wall and process route clearly, and we recommend TP316L when chlorides need molybdenum.

That matters on welded hygienic skids: shipping standard TP304 into an as-welded corrosive duty to save a few points of carbon control is how HAZ problems start. We quote the L grade the duty actually needs.

Supply Capability

SHH STEEL can produce and supply ASTM A269 TP304L to the edition, route, and finish on your enquiry. Capability and Stock / Available sizes follow.

Item SHH STEEL capability for TP304L
Standard ASTM A269 / A269M
Grade TP304L / UNS S30403
Product form Seamless and welded tube (no filler metal for welded), hot- or cold-finished
Delivery condition Solution heat-treated ≥1900 °F [1040 °C]; pickled or bright-annealed
Typical size band ~6–168 mm OD × 0.5–8.0 mm nominal wall (others by agreement)
Testing Hardness; flaring (seamless) / flange + reverse flattening (welded); hydro or NDE
Documents EN 10204 3.1 MTC; third-party inspection on request

Stock / Available sizes

Enquiry-oriented supply range — not a frozen tonnage list. Confirm against near-term production when you send the OD × wall list.

OD (mm) Typical nominal walls (mm) Notes
6 / 8 / 10 / 12 / 14 0.5 / 0.8 / 1.0 / 1.2 / 1.5 Instrument / hygienic; often BA
12.7 / 15.9 / 19.1 / 25.4 / 31.8 1.0 / 1.2 / 1.5 / 2.0 / 2.5 Inch OD skid and utility
38.1 / 48.3 / 60.3 / 76.1 1.5 / 2.0 / 2.5 / 3.0 / 4.0 Welded utility — L preferred over TP304
88.9 / 114.3 / 141.3 / 168.3 2.0 / 3.0 / 4.0 / 6.0 / 8.0 Larger process tube; lock seamless vs welded

Parallel quotes against A269 TP304 and A269 TP316L on the same size list keep cost and corrosion margin visible.

FAQ

What is ASTM A269 TP304L stainless steel tube used for?
A269 TP304L is the low-carbon 18-8 nominal-wall tubing grade for welded instrument panels, hygienic utility lines, dairy and beverage tubing, and mild process skids that will stay as-welded in service. It is general-service seamless or welded tubing under ASTM A269 — not Code boiler tube (that is A213) and not pipe (that is A312). Naming A269 on the purchase order locks the nominal-wall basis, hardness, and flaring or flange tests to the tubing product standard.
TP304 vs TP304L under A269 — which grade should I order?
Order TP304 when standard carbon (≤0.08%) is acceptable and fabrication will be re-annealed or service is mild. Order TP304L when as-welded intergranular corrosion resistance matters and carbon must stay at ≤0.035% (with the small-OD Footnote B allowance where it applies). They are separate A269 grades with different carbon ceilings and must not share one grade stamp on the same MTC line.
Does ASTM A269 TP304L include welded tube?
Yes. A269 covers both seamless and welded TP304L. Welded tube is made without filler metal, cold-worked, and solution-treated with the tube, then flange- and reverse-flattening-tested on the seam. Site titles omit the word “Welded” by house style, but the purchase order and MTC still state seamless or welded. SHH STEEL can produce and supply both routes against the same Table 1 and Table 2 floors.
What hardness limit applies to A269 TP304L?
Table 2 caps TP304L at 192 HBW / 200 HV or 90 HRB after solution treatment at ≥1900 °F [1040 °C]. That ceiling matches TP304; the metallurgical difference is carbon, not hardness. A269 does not publish a tensile, yield, or elongation acceptance table for TP304L, so do not invent 75/30 ksi-style floors from A213 unless the purchase order adds them as extras.
What does Footnote B mean for TP304L carbon on A269?
Table 1 Footnote B notes that for small outside diameter (under 0.500 in. [12.7 mm]) or light walls (under 0.049 in. [1.2 mm] minimum wall) where many drawing passes are required, a carbon maximum of 0.040% may be necessary in TP304L, TP304LN, TP316L, and TP316LN. Confirm the exact footnote wording in the purchased A269/A269M edition before writing it into a quality plan or drawing note.
Is A269 TP304L a nominal-wall or minimum-wall tube standard?
A269 is written on a nominal-wall-thickness basis for general-service tubing. Write OD × nominal wall on the enquiry unless you and the mill agree a different wall basis in writing. Table 4 then governs outside-diameter, wall, and cut-length tolerances for the ordered size group. Do not assume A213 minimum-wall boiler-tube practice applies to an A269 TP304L order.
What size range can SHH STEEL produce for A269 TP304L?
SHH STEEL can produce and supply roughly 6–168 mm OD with 0.5–8.0 mm nominal wall in seamless or welded A269 TP304L, pickled or bright-annealed, with EN 10204 3.1 mill test certificates. Larger or heavier sizes are quoted by agreement against mill capability. Send the OD × wall list and process preference for a firm near-term availability answer rather than assuming a frozen stock tonnage.
When should I choose TP316L instead of TP304L under A269?
Choose TP316L when the service medium needs molybdenum for better chloride pitting and crevice resistance — chloride-bearing washdown, many chemical process lines, and seawater-adjacent utilities. TP304L remains the right as-welded 18-8 answer for milder aqueous, food, and pharma utility duties where molybdenum is not justified by the corrosion review.
Which tests are mandatory on A269 TP304L tube?
Lot testing covers hardness to Table 2, flaring for seamless tube, and flange plus reverse flattening for welded tube. Each length must also receive a hydrostatic test or a nondestructive electric test; the manufacturer chooses unless the purchase order locks one method. Product analysis, PMI, and third-party inspection are supplementary when named on the order.
What certificate does SHH STEEL provide with A269 TP304L?
Standard supply includes an EN 10204 3.1 mill test certificate reporting ladle chemistry against Table 1, solution-treatment condition, hardness against Table 2, and the hydrostatic or NDE statement. Third-party inspection can be added when named. Stencil and tags carry ASTM A269, TP304L / S30403, size, heat number, and seamless or welded identity.
How should I enquire for A269 TP304L with SHH STEEL?
List ASTM A269, grade TP304L / UNS S30403, seamless or welded preference, OD × nominal-wall list and lengths (or coil), finish (pickled, bright-annealed, polish grit), and any lock on hydro versus NDE. Add a short note on the service medium if grade selection is still open. SHH STEEL can produce and supply to that enquiry or recommend TP316L or another A269 sister when the duty needs more than low-carbon 18-8.

Conclusion

ASTM A269 TP304L / UNS S30403 is the low-carbon 18-8 tubing grade for general-service lines that will be welded and expected to keep intergranular corrosion under control without molybdenum. SHH STEEL can produce and supply seamless and welded A269 TP304L, solution annealed to Table 2, tested, and documented on EN 10204 3.1 certificates. Start from the A269/A269M hub, then send the OD × nominal-wall list and medium notes. Contact admin@steelspecs.com for a production-backed offer.

Contact Us

Quality Steel Needed? Inquire for Offers

Need quality steel for your project? Inquire now to get tailored offers. Our team ensures quick responses, matching your needs with reliable steel solutions. Start your inquiry today.

    *

    *

    *

    *


    Related Products

    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response
    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response

      *

      *

      *

      *


      X