EN 10025-2 S275J2 Steel Plate | S275J2 Structural Steel
What is EN 10025-2 S275J2 Steel Plate?
As a professional steel plate supplier and China Mill-Direct Exporter, SHH STEEL is pleased to present EN 10025-2 S275J2 Steel Plate (Material Number: 1.0145).
S275J2 is a non-alloy structural steel under the European standard EN 10025-2. It provides a minimum yield strength of 275 MPa (for thickness ≤ 16 mm) and is impact tested at –20°C with a minimum energy of 27 J. Compared with S275JR and S275J0, the lower impact test temperature makes S275J2 more suitable for structural applications in colder environments or where higher toughness is required. SHH STEEL sources this material directly from leading Chinese steel mills, ensuring competitive mill-direct pricing, stable quality and reliable delivery.
We supply S275J2 steel plate in thicknesses from 6 mm to 150 mm (thicker plates available on request), widths up to 3000–4000 mm, and lengths up to 12000–18000 mm. Custom cutting, shot blasting and priming services are available. All plates are delivered with full Mill Test Certificates (EN 10204 3.1).
Material Specification
EN 10025-2 S275J2 steel plate is produced in accordance with EN 10025-2.
| Specification Element | Requirement | SHH STEEL Compliance |
|---|---|---|
| Primary Standard | EN 10025-2 | Full compliance |
| Steel Grade | S275J2 (1.0145) | Confirmed |
| Delivery Condition | +AR (As-rolled) or +N (Normalized) | Available |
| Product Form | Steel Plate | Available |
| Thickness Range | 6 mm – 150 mm | Custom sizes available |
| Width / Length | Up to 3000–4000 mm / 12000–18000 mm | Custom cutting supported |
| Certification | EN 10204 3.1 / 3.2 | Available |
Chemical Composition
According to EN 10025-2, the chemical composition is specified for both ladle analysis (cast analysis) and product analysis.
Ladle Analysis (Cast Analysis)
| Element | Thickness ≤ 40 mm | Thickness > 40 mm | Max. Limit |
|---|---|---|---|
| Carbon (C) | ≤ 0.18% | ≤ 0.20% | — |
| Manganese (Mn) | ≤ 1.50% | ≤ 1.50% | — |
| Phosphorus (P) | ≤ 0.025% | ≤ 0.025% | — |
| Sulfur (S) | ≤ 0.025% | ≤ 0.025% | — |
| Nitrogen (N) | ≤ 0.012% | ≤ 0.012% | — |
| Copper (Cu) | ≤ 0.55% | ≤ 0.55% | — |
Product Analysis
| Element | Thickness ≤ 40 mm | Thickness > 40 mm | Max. Limit |
|---|---|---|---|
| Carbon (C) | ≤ 0.21% | ≤ 0.22% | — |
| Manganese (Mn) | ≤ 1.60% | ≤ 1.60% | — |
| Phosphorus (P) | ≤ 0.035% | ≤ 0.035% | — |
| Sulfur (S) | ≤ 0.035% | ≤ 0.035% | — |
| Nitrogen (N) | ≤ 0.014% | ≤ 0.014% | — |
| Copper (Cu) | ≤ 0.60% | ≤ 0.60% | — |
Note:
- The maximum nitrogen content does not apply if the total aluminium content is ≥ 0.020%.
- Carbon Equivalent (CEV) is controlled to ensure good weldability.
- S275J2 is normally fully killed.
Mechanical Properties
Mechanical properties of EN 10025-2 S275J2 (longitudinal direction):
| Thickness (mm) | Yield Strength ReH (min) | Tensile Strength Rm | Elongation A (min) | Impact Energy KV (min) |
|---|---|---|---|---|
| ≤ 16 | 275 MPa | 410 – 560 MPa | 23% | 27 J at –20°C |
| > 16 ≤ 40 | 265 MPa | 410 – 560 MPa | 23% | 27 J at –20°C |
| > 40 ≤ 63 | 255 MPa | 410 – 560 MPa | 22% | 27 J at –20°C |
| > 63 ≤ 100 | 245 – 235 MPa | 410 – 560 MPa | 21% | 27 J at –20°C |
| > 100 ≤ 150 | 225 MPa | 400 – 540 MPa | 19% | 27 J at –20°C |
Delivery Conditions
SHH STEEL, as a China Mill-Direct Supplier, supplies EN 10025-2 S275J2 steel plate mainly in the following conditions:
- +AR (As-rolled) – most common
- +N (Normalized) – available on request
Additional options:
- Shot blasting and shop primer
- Ultrasonic testing (EN 10160)
- Z-direction testing (Z15 / Z25 / Z35)
- Third-party inspection (SGS, BV, TUV, etc.)
Tolerances
Dimensional tolerances for S275J2 steel plate follow EN 10029 (for plates) or EN 10051 (for strips).
- Thickness, width and length tolerances according to the ordered class.
- Flatness according to EN 10029.
- Edge conditions: Mill edge or cut edge (flame / plasma).
Tighter tolerances can be provided upon request.
Weldability
S275J2 has good weldability due to its controlled carbon content and carbon equivalent. It can be welded by all conventional methods (SMAW, SAW, GMAW, FCAW, etc.). Preheating may be required for thicker plates. Low-hydrogen consumables are recommended for critical applications.
Equivalent Material Grades
| Grade | Standard | Notes |
|---|---|---|
| S275J2 | EN 10025-2 | — |
| 1.0145 | EN | Material number |
| Q275D | GB/T 700 | Closest Chinese equivalent |
| A572 Grade 42 (approx.) | ASTM | Similar strength level |
| St44-3N | DIN (old) | Former designation |
Applications
EN 10025-2 S275J2 is widely used in structural applications requiring good toughness at low temperatures. Typical uses include:
| Application Area | Typical Components / Uses (Keywords) |
|---|---|
| Building Structures | Beams, columns, frames – S275J2 Structural Steel |
| Bridges | Bridge components in colder regions – S275J2 Bridge |
| Machinery | Base plates, frames – S275J2 Machinery |
| Construction | Structures requiring –20°C toughness – S275J2 Construction |
| Storage Tanks | Non-pressure tanks and silos – S275J2 Storage |
| General Fabrication | Welded structures – S275J2 Fabrication |
Why Choose SHH STEEL
SHH STEEL is a China Mill-Direct Exporter. We maintain long-term strategic cooperation with major Chinese steel mills and act as a first-level (primary) agent. This direct mill supply model allows us to offer competitive mill-direct pricing, faster delivery times, stable and traceable quality, and full Mill Test Certificates (EN 10204 3.1 / 3.2) for EN 10025-2 S275J2 Steel Plate.
Customers benefit from reliable supply, short lead times and cost-effective solutions for structural steel projects worldwide. Our professional export team provides technical support and customized processing services to meet project requirements.
FAQ
- What does the “J2” in S275J2 mean?“J2” indicates that the steel meets the impact energy requirement of minimum 27 J at –20°C.
- What is the difference between S275JR, S275J0 and S275J2?The difference is the impact test temperature:JR: +20°C J0: 0°C J2: –20°C
- What is the material number of S275J2?1.0145
Conclusion
EN 10025-2 S275J2 (1.0145) Steel Plate from SHH STEEL offers reliable structural performance with improved toughness at –20°C. As a China Mill-Direct Exporter, we provide competitive pricing, fast delivery and consistent quality backed by full mill certifications. Trust SHH STEEL for your S275J2 structural steel plate requirements.
Contact SHH STEEL today for stock availability, pricing and technical support. EN 10025-2 S275J2 Steel Plate, S275J2 steel plate, S275J2 structural steel, EN 10025 S275J2, S275J2 equivalent, S275J2 supplier, 1.0145
Quality Steel Needed? Inquire for Offers
Related Products
