ASTM A269 UNS S31266 Stainless Steel Tube | ASTM A269 Stainless Steel - SHH STEEL

ASTM A269 UNS S31266 Stainless Steel Tube

ASTM A269 UNS S31266 nominal-wall seamless and welded austenitic tubing, heat-treated per Table 2 where verified (hardness not verified in public Table 2 excerpt — confirm purchased edition). SHH STEEL can produce and supply with EN 10204 3.1 MTCs.
Grade
UNS S31266
Standard
ASTM A269 / A269M
Product form
Seamless and welded tube (no filler metal for welded), heat-treated
Size
Typical OD × nominal wall from ~6 mm to 168 mm OD × 0.5–8.0 mm wall; other OD × wall by agreement
Share:
Overview
Chemical Composition
Mechanical Properties
Seamless and Welded
Specification
Equivalent Grades
Heat Treatment
Corrosion Resistance
Applications
Weldability
Surface Finishes
Inspection and Testing
Packaging and Shipping
Why Choose SHH STEEL
Supply Capability
FAQ
Conclusion

What is ASTM A269 UNS S31266 Stainless Steel Tube

ASTM A269 / A269M covers nominal-wall seamless and welded austenitic stainless steel tubing for general corrosion-resisting and low- or high-temperature service. UNS S31266 is a high Mo-N super-austenitic with copper and tungsten additions listed in A269 Table 1 block 2 — ordered by UNS without a TP letter — aimed at aggressive chloride and chemical duties beyond commodity 316L. Name ASTM A269 and UNS S31266 on the purchase order so nominal-wall rules, heat treatment, and hardness apply to tubing — not to an A213 boiler-tube or A312 pipe text.

SHH STEEL can produce and supply ASTM A269 UNS S31266 stainless steel tube as seamless and welded product in the instrument-to-process OD × nominal-wall band, solution annealed, with EN 10204 3.1 mill test certificates reporting Table 1 ladle chemistry and Table 2 hardness where verified. Typical sizes run about 6–168 mm OD × 0.5–8.0 mm nominal wall; other sizes by agreement. Browse sisters on the A269/A269M hub. Keep the wall basis nominal.

If the duty is actually boiler / heat-exchanger minimum-wall tube or pipe rather than A269 nominal-wall tubing, open A312 UNS S31266 and SA312 UNS S31266 and match the product standard to the drawing.

Chemical Composition of A269 UNS S31266

Heat analysis under A269 Table 1 is mandatory for every UNS S31266 heat; product analysis applies when ordered through ASTM A1016/A1016M and A480/A480M Table A1.1 tolerances. SHH STEEL reports measured ladle values — and product values when ordered — without advertising unpublished tighter catalogue windows.

ASTM A269/A269M-24 Table 1 block 2 store excerpt for UNS S31266 (also listed in -25). High Mo-N with Cu and W.

Melting analysis (heat / ladle analysis) — Table 1

Element UNS S31266 melting analysis
Carbon (C) ≤ 0.030
Manganese (Mn) 2.00 – 4.00
Phosphorus (P) ≤ 0.035
Sulfur (S) ≤ 0.020
Silicon (Si) ≤ 1.00
Chromium (Cr) 23.0 – 25.0
Nickel (Ni) 21.0 – 24.0
Molybdenum (Mo) 5.2 – 6.2
Nitrogen (N) 0.35 – 0.60
Copper (Cu) 1.00 – 2.50
Tungsten (W) 1.50 – 2.50

Source: ASTM A269/A269M-24 store Table 1 excerpt for UNS S31266. Mo 5.2–6.2%, N 0.35–0.60%, Cu 1.00–2.50%, W 1.50–2.50% must appear on the MTC. UNCERTAIN: Table 2 heat-treatment/hardness digits for S31266 were not found in the public -15 PDF Table 2 block — confirm against the purchased -24/-25 edition before writing acceptance hardness.

Mechanical Properties of A269 UNS S31266

ASTM A269 does not publish a tensile-strength, yield, or elongation acceptance table for UNS S31266. Lot acceptance is built on hardness (Table 2), flaring for seamless tube, flange and reverse flattening for welded tube, and hydro or NDE on each length. Do not invent tensile floors from A213 or A312 unless the purchase order adds them as project extras. Do not invent a hardness ceiling for S31266 from a sister 6Mo grade.

Property UNS S31266 requirement (A269 Table 2)
Hardness, max confirm purchased edition (not verified in public -15 Table 2 excerpt)
Tensile / yield / elongation Not specified as an A269 acceptance table for this grade

Source: ASTM A269/A269M Table 2 for UNS S31266 (public PDF excerpt where verified). Confirm thin-wall superficial Rockwell alternatives in the purchased edition before writing them into a quality plan.

Seamless and Welded Tube

Under A269, UNS S31266 tubing may be seamless or welded, and hot-finished or cold-finished, unless the purchase order locks the route. Welded A269 tube is autogenous — no filler metal in the longitudinal seam — then cold-worked and solution-treated with the tube. That is not A312 WLD/HCW pipe stencil language; A269 simply records seamless or welded on the product and MTC.

Seamless UNS S31266 takes a lot-basis flaring test; welded UNS S31266 takes flange and reverse-flattening tests so the seam is exercised in both opening and reverse-bend modes. Both routes share Table 2 hardness and the mandatory hydrostatic or nondestructive electric test on each length. SHH STEEL can produce and supply both seamless and welded A269 UNS S31266 against the same Table 1 chemistry and Table 2 hardness floors — name the required route on the enquiry.

Dimensions and Tolerances

Order A269 UNS S31266 by outside diameter and nominal wall thickness, not by pipe schedule as the primary size language. Permissible variations come from A269 Table 4 and the general requirements in ASTM A1016/A1016M; thin-wall ovality rules in clause 12.2 apply when wall thickness falls below the thin-wall thresholds listed for each OD group.

OD group (A269 Table 4) Outside diameter tolerance Wall thickness tolerance
Up to ½ in. [13 mm] ±0.005 in. [0.13 mm] ±15%
½ to 1½ in. [13–38 mm], excl. ±0.005 in. [0.13 mm] ±10%
1½ to 3½ in. [38–89 mm], excl. ±0.010 in. [0.25 mm] ±10%
3½ to 5½ in. [89–140 mm], excl. ±0.015 in. [0.38 mm] ±10%
5½ to 8 in. [140–203 mm], excl. ±0.030 in. [0.76 mm] ±10%

Source: ASTM A269/A269M Table 4 (public PDF excerpt). Footnotes allow wider wall variation on heavy wall or low ID/OD ratios and on sub-½ in. ID non-mandrel tube. If a drawing uses A213 minimum-wall language for UNS S31266, say so on the enquiry so SHH STEEL does not build the wrong wall basis.

Equivalent Grades

UNS S31266 is ordered under A269 as listed in Table 1. Related forms may appear under A213/A312/A240 by the same UNS with different wall bases and mechanical tables.

Reference Designation Note
ASTM A269 UNS S31266 This product standard
UNS S31266 Chemistry identity
Other ASTM forms Same UNS where listed Confirm product form before substituting

Compare A269 UNS S31254 when a fully verified Table 2 hardness row is preferred.

Same-grade pages under related product standards (different wall basis and mechanical tables — not drop-in substitutes for A269 tubing): A312 UNS S31266 and SA312 UNS S31266. Confirm the product form before treating any of those pages as acceptance text for an A269 order.

Heat Treatment and Delivery Condition

All A269 UNS S31266 tube is furnished solution heat-treated. Table 2 sets austenitizing at confirm purchased edition (not verified in public -15 Table 2 excerpt), followed by water quench or rapid cool by other means. Seamless tube may be quenched immediately after hot forming while still at or above the specified minimum. Ordered final anneals below 1900 °F [1040 °C], when permitted and specified, must be stenciled with the actual temperature after the suffix “HT.”

Item UNS S31266 (A269 Table 2)
Austenitizing temperature confirm purchased edition (not verified in public -15 Table 2 excerpt)
Cooling Water quench or rapid cool
Hardness after heat treatment, max confirm purchased edition (not verified in public -15 Table 2 excerpt)
Delivery condition Solution heat-treated; pickled or bright-annealed by agreement

Source: ASTM A269/A269M §6 and Table 2 for UNS S31266 (public excerpt where verified). SHH STEEL’s MTC states the heat-treatment condition actually applied to the shipped lengths.

Corrosion Resistance

Mo near 6%, high nitrogen, copper, and tungsten support localised-attack resistance in aggressive chloride and chemical services when the list names S31266. A269 publishes no PREN — do not invent one. Confirm heat-treatment and hardness in the purchased edition because the public Table 2 excerpt available to the writer did not clearly list this UNS.

Compare A269 UNS S31254 and A269 UNS S32654 when Mo level is still open.

Applications of A269 UNS S31266 Tube

A269 UNS S31266 appears on chemical and chloride-aggressive process tubing specs that explicitly call S31266. SHH STEEL can produce and supply that product and will confirm Table 2 heat treatment/hardness against the ordered edition on the enquiry.

It is not boiler tube or pipe unless those standards separately list the UNS.

When a sister enquiry is for boiler tube or pipe of the same grade, use A312 UNS S31266 and SA312 UNS S31266 instead of stretching an A269 tubing page into the wrong product form.

Weldability

High Mo-N-W austenitics need filler and procedure matched to S31266 after engineering review. Mill autogenous A269 welds are solution-treated with the tube; shop welds are not.

SHH STEEL supplies the mill product and MTC with Mo, N, Cu, and W reported.

Surface Finishes

Pickled and bright-annealed finishes cover most A269 UNS S31266 orders, and named OD polish grit is quoted as a supplementary finish when the purchase order requires a measured belt polish. Bright anneal is preferred for instrumentation and clean-process ID/OD; pickle is the general-process default when a clean but not bright surface is enough for the duty.

Write any maximum Ra, scrubbed-ID, or electropolish note into the enquiry. SHH STEEL can produce and supply pickled, bright-annealed, and polished A269 UNS S31266 when the mill can measure and report the finish, and we will not claim an unverified polish grade on the certificate.

Inspection and Testing

Lot testing for A269 UNS S31266 covers Table 2 hardness, flaring on seamless tube, and flange plus reverse flattening on welded tube, with lot definitions tied to heat, size, and heat-treatment charge as written in the standard. Each length must also receive a hydrostatic test or a nondestructive electric test; the manufacturer chooses unless the purchase order locks the method, and NDE-tested lengths are marked “NDE” and certified accordingly.

EN 10204 3.1 certificates from SHH STEEL report ladle chemistry against Table 1, solution-treatment condition, hardness against Table 2, and the hydro or NDE statement. PMI, product analysis, and third-party inspection holds are available when named on the order, and we do not skip mandatory tests to shorten lead time.

Packaging and Shipping

Export and domestic packs for A269 UNS S31266 use end caps, size-sorted bundles or crates, and waterproof wrap for ocean freight so OD finish and ends stay protected in transit. Bright-annealed and polished OD get extra sleeve protection against galling; coiled product, when ordered, follows A269’s continuous-coil rule without circumferential butt welds inside the coil.

Stencil and tags typically carry ASTM A269, UNS S31266, size, heat number, seamless or welded identity, and NDE when that route was used. SHH STEEL matches marking to the purchase-order marking clause before dispatch so receiving inspection can verify identity against the MTC.

Why Choose SHH STEEL

SHH STEEL can produce and supply ASTM A269 UNS S31266 as seamless or welded tubing with Table 1 chemistry and EN 10204 3.1 documentation, and we will state Table 2 hardness only from the ordered edition — not from an invented sister-grade ceiling.

If a fully verified 6Mo listing is preferred, we also quote A269 UNS S31254.

Supply Capability

SHH STEEL can produce and supply ASTM A269 UNS S31266 Stainless Steel Tube against the edition, process route, and finish named on your enquiry. Capability and Stock / Available sizes follow.

Item SHH STEEL capability
Standard ASTM A269 / A269M
Grade UNS S31266
Product form Seamless and welded tube (no filler metal for welded), hot- or cold-finished
Delivery condition Solution heat-treated (confirm purchased edition (not verified in public -15 Table 2 excerpt)); pickled or bright-annealed
Typical size band ~6–168 mm OD × 0.5–8.0 mm nominal wall (others by agreement)
Testing Hardness; flaring (seamless) / flange + reverse flattening (welded); hydro or NDE
Documents EN 10204 3.1 MTC; third-party inspection on request

Stock / Available sizes

Enquiry-oriented supply range — not a frozen warehouse SKU list. Send the OD × nominal-wall list and seamless/welded preference for confirmation against near-term production.

OD (mm) Typical nominal walls (mm) Notes
6 / 8 / 10 / 12 / 14 0.5 / 0.8 / 1.0 / 1.2 / 1.5 Instrument / hydraulic; often BA
12.7 / 15.9 / 19.1 / 25.4 / 31.8 1.0 / 1.2 / 1.5 / 2.0 / 2.5 Inch OD process and utility
38.1 / 48.3 / 60.3 / 76.1 1.5 / 2.0 / 2.5 / 3.0 / 4.0 Utility and light process
88.9 / 114.3 / 141.3 / 168.3 2.0 / 3.0 / 4.0 / 6.0 / 8.0 Larger process tube; lock seamless vs welded

Enquiry tip — Compare A269 UNS S31254 when a fully verified Table 2 hardness row is preferred.

FAQ

What is ASTM A269 UNS S31266 stainless steel tube used for?
A269 UNS S31266 is nominal-wall seamless or welded austenitic tubing for general corrosion-resisting and low- or high-temperature service where this UNS chemistry is specified. It is not Code boiler tube (A213) and not pipe (A312). Put A269 on the purchase order so wall basis and tests match the tubing product standard.
Does ASTM A269 UNS S31266 include welded tube?
Yes. Seamless and welded routes are both allowed. Welded tube is autogenous, cold-worked, solution-treated with the tube, and flange- plus reverse-flattening-tested. SHH STEEL can produce and supply both routes against the same chemistry and hardness floors. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.
What hardness limit applies to A269 UNS S31266?
Where verified in public Table 2 excerpts, hardness is not verified in public Table 2 excerpt — confirm purchased edition after the required solution treatment. A269 does not publish a tensile acceptance table for this grade — do not invent tensile floors from A213 or A312 unless the purchase order adds them.
Is A269 UNS S31266 nominal wall or minimum wall?
Nominal wall. Write OD × nominal wall on the enquiry unless you agree another wall basis with the mill. Table 4 then governs tolerances. Do not assume A213 minimum-wall boiler-tube practice applies to this A269 grade. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.
What size range can SHH STEEL produce for UNS S31266?
SHH STEEL can produce and supply about 6–168 mm OD × 0.5–8.0 mm nominal wall in seamless or welded A269 UNS S31266, pickled or bright-annealed, with EN 10204 3.1 MTCs. Other sizes by agreement — send the OD × wall list for a firm near-term availability answer.
Which tests are mandatory on A269 UNS S31266 tube?
Hardness to Table 2 where required; flaring for seamless or flange plus reverse flattening for welded; and hydrostatic or nondestructive electric testing on each length. The mill picks hydro or NDE unless the purchase order locks one method. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.
What certificate does SHH STEEL provide for UNS S31266?
EN 10204 3.1 MTCs report ladle chemistry against Table 1, solution-treatment condition, hardness against Table 2 where verified, and hydro or NDE. Third-party inspection can be added. Stencil shows ASTM A269, UNS S31266, size, heat, and seamless or welded identity. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.
How should I enquire for A269 UNS S31266 with SHH STEEL?
List ASTM A269, grade UNS S31266, seamless or welded preference, OD × nominal wall, finish, and any hydro/NDE lock. Add the service medium if alloy selection is still open. SHH STEEL can produce and supply to that enquiry. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.
Why is hardness listed as confirm purchased edition?
The public A269-15 PDF Table 2 block available to the writer did not clearly show S31266, while Table 1 chemistry appears in the -24 store excerpt. Until the purchased edition’s Table 2 is checked, hardness must not be invented from a sister 6Mo grade.
S31266 vs S31254 under A269?
Both are high-Mo austenitics, but S31266 adds tungsten and a different Mo/N/Cu window. They are separate Table 1 grades — choose the UNS the drawing names. Confirm the purchased A269/A269M edition, OD × nominal wall, and seamless or welded route on the purchase order before treating secondary catalogues as acceptance text.

Conclusion

ASTM A269 UNS S31266 belongs in the A269 nominal-wall tubing family when this chemistry is named for general-service lines. SHH STEEL can produce and supply seamless and welded A269 UNS S31266, heat-treated and tested per the ordered edition, and documented on EN 10204 3.1 certificates. Start from the A269/A269M hub, then send the OD × nominal-wall list. Contact admin@steelspecs.com for a production-backed offer.

Contact Us

Quality Steel Needed? Inquire for Offers

Need quality steel for your project? Inquire now to get tailored offers. Our team ensures quick responses, matching your needs with reliable steel solutions. Start your inquiry today.

    *

    *

    *

    *


    Related Products

    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response
    SHH STEEL Get Your Steel Quote—Inquire Now for Quick Response

      *

      *

      *

      *


      X