EN 10025-6 S620Q Steel Plate | S620Q QT High Structural Steel
What is EN 10025-6 S620Q Steel Plate?
SHH STEEL is a professional China Mill-Direct Exporter of high-strength structural steel plates. We are pleased to offer EN 10025-6 S620Q Steel Plate (Material Number 1.8914), a quenched and tempered grade engineered for structural applications that demand higher strength than the S550 series.
S620Q belongs to the family of EN 10025-6 steel plate products covering high-yield-strength steels in the quenched and tempered condition. After quenching and tempering, this grade achieves a minimum yield strength of 620 MPa (up to 50 mm thickness) while maintaining adequate impact toughness at –20°C. The refined tempered microstructure provides an excellent balance of high strength, ductility and weldability for heavily loaded welded structures.
SHH STEEL supplies S620Q plates in thicknesses ranging from 6 mm to 150 mm, widths up to 3000–4000 mm and lengths up to 12000–18000 mm. Custom cutting, ultrasonic testing, surface treatment and third-party inspection services are available. Every plate is delivered with a full EN 10204 3.1 Mill Test Certificate, ensuring complete traceability from the producing mill.
Material Specification
| Parameter | Requirement / Availability |
|---|---|
| Governing Standard | EN 10025-6 |
| Steel Designation | S620Q (1.8914) |
| Delivery Condition | Quenched and Tempered (Q) |
| Product Form | Flat steel plate |
| Thickness Range | 6 mm – 150 mm (thicker plates on request) |
| Width / Length | Up to 3000–4000 mm / 12000–18000 mm |
| Certification | EN 10204 3.1 / 3.2 |
| Additional Testing | UT, Z-test, third-party inspection available |
Chemical Composition
Chemical composition is controlled in accordance with EN 10025-6 for both ladle (heat) analysis and product analysis.
Ladle Analysis (Cast Analysis)
| Element | Maximum (%) |
|---|---|
| Carbon (C) | 0.20 |
| Silicon (Si) | 0.80 |
| Manganese (Mn) | 1.70 |
| Phosphorus (P) | 0.025 |
| Sulfur (S) | 0.015 |
| Chromium (Cr) | 1.50 |
| Nickel (Ni) | 2.00 |
| Molybdenum (Mo) | 0.70 |
| Copper (Cu) | 0.50 |
| Niobium (Nb) | 0.06 |
| Vanadium (V) | 0.12 |
| Titanium (Ti) | 0.05 |
| Boron (B) | 0.005 |
| Nitrogen (N) | 0.015 |
Product Analysis
| Element | Maximum (%) |
|---|---|
| Carbon (C) | 0.22 |
| Silicon (Si) | 0.86 |
| Manganese (Mn) | 1.80 |
| Phosphorus (P) | 0.030 |
| Sulfur (S) | 0.017 |
| Chromium (Cr) | 1.60 |
| Nickel (Ni) | 2.10 |
| Molybdenum (Mo) | 0.74 |
| Copper (Cu) | 0.55 |
| Niobium (Nb) | 0.07 |
| Vanadium (V) | 0.14 |
| Titanium (Ti) | 0.06 |
| Boron (B) | 0.006 |
| Nitrogen (N) | 0.016 |
The alloying system is designed to provide sufficient hardenability for quenching while keeping the carbon equivalent within a range that still allows satisfactory welding after tempering.
Mechanical Properties
| Nominal Thickness (mm) | Min. Yield Strength ReH | Tensile Strength Rm | Min. Elongation A | Impact Energy (longitudinal) |
|---|---|---|---|---|
| ≤ 50 | 620 MPa | 700 – 890 MPa | 15 % | 30 J at –20 °C |
| 50 < t ≤ 100 | 580 MPa | 700 – 890 MPa | 15 % | 30 J at –20 °C |
| 100 < t ≤ 150 | 540 MPa | 650 – 830 MPa | 15 % | 30 J at –20 °C |
Density is approximately 7.85 g/cm³.
Delivery Conditions
All S620Q plates are supplied in the quenched and tempered condition as required by EN 10025-6. The quenching and tempering heat treatment produces the required high strength and toughness combination.
Additional processing options available from SHH STEEL:
- Shot blasting and shop primer application
- Ultrasonic testing in accordance with EN 10160
- Through-thickness (Z-direction) testing to Z15, Z25 or Z35
- Independent third-party inspection (SGS, BV, TUV, Lloyd’s Register, etc.)
- Precision cutting (flame, plasma or water-jet)
Tolerances
EN 10025-6 S620Q Steel Plate dimensional tolerances are supplied in accordance with EN 10029. For S620Q QT High Structural Steel, customers may select the required class for thickness, width, length and flatness according to project needs. Both mill edges and cut edges (flame or plasma) are available for S620Q steel plate. Tighter tolerances for EN 10025-6 S620Q can be arranged by special agreement when required.
Weldability
S620Q is a high-strength quenched and tempered steel. Successful welding requires careful attention to preheating, heat input and the use of low-hydrogen consumables to maintain toughness in the heat-affected zone.
Recommended welding consumables:
| Welding Process | Suggested Consumables |
|---|---|
| SMAW (Stick) | E9018-G, E10018-G |
| GMAW / MAG | ER90S-G, ER100S-G |
| FCAW | E91T1-G, E101T1-G |
| SAW | Matching high-strength wire and flux combinations |
Preheating is generally required, especially for thicker plates. Interpass temperature control is important, and post-weld heat treatment may be considered for critical applications.
Equivalent Material Grades
| Grade | Standard | Remarks |
|---|---|---|
| S620Q | EN 10025-6 | Primary designation |
| 1.8914 | EN | Material number |
| Q620D / Q620E | GB/T 1591 | Closest Chinese equivalents |
| Selected A514 / A517 grades | ASTM | Similar quenched & tempered concept |
| StE 620 V | Former DIN | Historical related grade |
Applications
EN 10025-6 S620Q is selected when higher strength than the S550 series is required. Typical applications include:
| Application Area | Typical Components / Keywords |
|---|---|
| Heavy Construction | Crane booms, heavy frames, high-load columns – S620Q Structural Steel |
| Bridge Engineering | Main girders, support structures – S620Q Bridge |
| Mining & Earthmoving Equipment | Chassis, boom structures – S620Q Mining |
| Offshore & Marine | Platform components, lifting equipment – S620Q Offshore |
| Energy & Power | Wind turbine components, heavy fabrications – S620Q Energy |
| General Heavy Fabrication | High-strength welded assemblies – S620Q Fabrication |
Why Choose SHH STEEL
SHH STEEL is a China Mill-Direct Exporter. We maintain long-term strategic cooperation with major Chinese steel mills and act as a first-level agent. This direct supply model allows us to offer competitive mill-direct pricing, shorter lead times, consistent quality and full Mill Test Certificates (EN 10204 3.1 / 3.2) for EN 10025-6 S620Q Steel Plate.
Our experienced export and technical teams provide support on material selection, welding procedures, cutting and processing. Customers benefit from reliable supply and professional service for high-strength quenched and tempered steel projects worldwide.
FAQ
- What does “Q” mean in S620Q?“Q” indicates the quenched and tempered condition and impact testing at –20°C.
- What is the difference between S620Q and S620QL?Both grades have the same strength level. S620Q is impact tested at –20°C, while S620QL is tested at –40°C and offers higher toughness for colder service.
- What is the material number of S620Q?1.8914
Conclusion
EN 10025-6 S620Q (1.8914) quenched and tempered steel plate from SHH STEEL provides a high yield strength of 620 MPa combined with reliable toughness at –20°C. As a China Mill-Direct Exporter, we offer competitive pricing, consistent quality and full technical support. Contact SHH STEEL today for stock availability, pricing or processing services.
EN 10025-6 S620Q Steel Plate, S620Q steel plate, S620Q QT, EN 10025 S620Q, S620Q equivalent, S620Q supplier, 1.8914
Quality Steel Needed? Inquire for Offers
Related Products
