EN 10025 Standard Steel Plate
2015年12月4日 by admin
EN 10025 Standard Steel Plate
1. China United Iron and Steel Limited offers structural steel plate that meets the European standard for structural steel. We carry EN 10025 2004, in grades of S235, S275, S355, S420, S690 and S890.
2. The EN 10025 2004 encompasses a broader range of structural metallic products and divides them into six basic categories
3. General Purpose Steels
Non-alloy Structural Steels
Normalized Normalized-Rolled Weldable Fine Grain Structural Steels
Thermo Mechanically-Rolled Weldable Fine Grain Structural Steel
Atmospheric Corrosion Resistant Structural Steel (“Weathering Steel”)
High Strength, Quenched and Tempered Structural Steel
Within these six categories are individual grades. The foundation of each grade within the EN 10025 standard is the material’s tested yield strength measured in megapascals (1 MPa = .145 ksi). Each structural steel grade begins with an “S” and is followed by suffixes that represent variations in the specific requirement for that structural application.
4. Example S355K2C+N
“S” - structural steel
“355” - 355 MPa 51,486 PSI
“K2” - Longitudinal Charpy V-notch Impact 40 J @ -20 degrees C
“C” - Grade suitable for cold forming
“+N” - supply condition normalized or normalized rolled
5. If you have any other requirement for steel plate, please feel free to contact us.
| EN Standard Steel Plates Grades | |
| S235 | S275 |
| S355 | S420 |
| S690 | S890 |
| EN 10025 - 1 : 2004 General Technical Delivery Conditions | ||||
| EN 10025 - 2 : 2004 Technical delivery conditions for non-alloy structural steels | ||||
| 1.0035 | S185 | | 1.0038 (dubl) | S235JR |
| 1.0044 | S275JR | | 1.0045 | S355JR |
| 1.005 | E295 | | 1.006 | E335 |
| 1.007 | E360 | | 1.0114 | S235J0 |
| 1.0116 (dubl) | S235J2(+N) | | 1.0117 | S235J2 |
| 1.0143 | S275J0 | | 1.0144 | S275J2(+N) |
| 1.0145 | S275J2 | | 1.0553 | S355J0 |
| 1.0570 (dubl) | S355J2(+N) | | 1.0577 | S355J2 |
| 1.059 | S450J0 | | 1.0595 | S355K2(+N) |
| 1.0596 | S355K2 | | | |
| EN 10025 - 3 : 2004 Technical delivery conditions for normalized / normalized rolled weldable fine grain structural steels | ||||
| 1.049 | S275N | | 1.0491 | S275NL |
| 1.0545 | S355N | | 1.0546 | S355NL |
| 1.8901 | S460N | | 1.8902 | S420N |
| 1.8903 | S460NL | | 1.8912 | S420NL |
| EN 10025 - 4 : 2004 Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels. | ||||
| 1.8818 | S275M | | 1.8819 | S275ML |
| 1.8823 | S355M | | 1.8825 | S420M |
| 1.8827 | S460M | | 1.8834 | S355ML |
| 1.8836 | S420ML | | 1.8838 | S460ML |
| EN 10025 - 5: 2004 Technical delivery conditions for structural steels with improved atmospheric corrosion resistance | ||||
| 1.8945 | S355J0WP | | 1.8946 | S355J2WP |
| 1.8958 | S235J0W | | 1.8959 | S355J0W |
| 1.8961 | S235J2W | | 1.8963 | S355J2W(+N) |
| 1.8965 | S355J2W | | 1.8966 | S355K2W(+N) |
| 1.8967 | S355K2W | | | |
| EN 10025 - 6 : 2004 Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered conditions | ||||
| 1.8904 | S550Q | | 1.8906 | S460QL |
| 1.8908 | S460Q | | 1.8909 | S500QL |
| 1.8914 | S620Q | | 1.8916 | S460QL1 |
| 1.8924 | S500Q | | 1.8925 | S890QL1 |
| 1.8926 | S550QL | | 1.8927 | S620QL |
| 1.8928 | S690QL | | 1.8931 | S690Q |
| 1.8933 | S960QL | | 1.894 | S890Q |
| 1.8941 | S960Q | | 1.8983 | S890QL |
| 1.8984 | S500QL1 | | 1.8986 | S550QL1 |
| 1.8987 | S620QL1 | | 1.8988 | S690QL1 |
0 Comments, 0 Trackbacks